Options
CCNP-Route: VRF-Lite - % VRF practice not configured. - Unknown vrf specified
Hi Everyone,
I'm baffled by this one. I am running a Cisco 2600IOS, Ver 12.2(24) in GNS3 when I try to configure VRF-Lite, I get these errors:
R3(config)#ip vrf practice
R3(config-vrf)#exit
R3(config)#
R3(config)#int e1/1
R3(config-if)#ip vrf forwarding practice
% VRF practice not configured.
R3(config-if)#
R3(config-if)#exit
R3(config)#router ospf 1 vrf
R3(config)#router ospf 1 vrf practice
Unknown VRF specified
R3(config)#
Any advise would be greatly appreciated.
Thanks,
Node
I'm baffled by this one. I am running a Cisco 2600IOS, Ver 12.2(24) in GNS3 when I try to configure VRF-Lite, I get these errors:
R3(config)#ip vrf practice
R3(config-vrf)#exit
R3(config)#
R3(config)#int e1/1
R3(config-if)#ip vrf forwarding practice
% VRF practice not configured.
R3(config-if)#
R3(config-if)#exit
R3(config)#router ospf 1 vrf
R3(config)#router ospf 1 vrf practice
Unknown VRF specified
R3(config)#
Any advise would be greatly appreciated.
Thanks,
Node
Comments
-
Options
Mitechniq
Member Posts: 286 ■■■■□□□□□□
Depending on what version IOS you have, it may not support VRF. -
Options
Priston
Member Posts: 999 ■■■■□□□□□□
Have you tried any troubleshooting with ip vrf show commands? Have you tried a different image?A.A.S. in Networking Technologies
A+, Network+, CCNA -
Options
networker050184
Mod Posts: 11,962 Mod
Might need to configure an RD on that first for it to work.An expert is a man who has made all the mistakes which can be made. -
Options
Kreken
Member Posts: 284
I would change IOS or try it on a different router. Your code is fine. I noticed in GNS 3 in some IOS builds, specifically VRF feature doesn't work properly or essential commands are missing. -
Options
Node Man
Member Posts: 668 ■■■□□□□□□□
HI Everybody,
Thanks for the responses. VRF worked on a different IOS.