Options
Net+ performance base question.
Hey can anybody describe some pbq so i know what to expect on the exam and not be caught off guard as i failed the net+ exam twice because of those damn pbq. thanks.
Comments
-
Options
TomkoTech Member Posts: 438
Im confused. If you have already taken the Net+ twice and failed then you already know what to expect no?
Or are you asking for a brain **** to cram with? -
Options
axzz Registered Users Posts: 2 ■□□□□□□□□□
I last took the exam in January, and i did see 2 question that were the same but the rest were different and i spent way too much of my time trying to figure out the rest because it was worded so vaguely, I'm using the pearson vue simulation to try and focus on certain area, and i got a different book, i just want to be point in the right direction. because i'm fine with the wap configuration, and subnetting i just want to know if i would need to configure a switch or a router. -
Options
Boxxer Member Posts: 25 ■■□□□□□□□□
You said you failed the network+ exam twice, so I am assuming you already know the types of questions that were asked. Don't expect the questions to be the same each time you take the exam, that's why you need to study all the topics that are addressed on the test. I recommend you download the exam objectives from CompTIA's website and go through the bullet points to make sure you know the information that will be on the test.
As for configuring routers and switches, if I remember correctly you don't have to do much configuring since it's mostly theoretical. Most of the simulation questions should be drag and drop on this test so you don't have to memorize any kind of router/switch commands that you would see on a Cisco test. -
Options
TomkoTech Member Posts: 438
I won't be sitting to take this exam until June as that is when I am starting back up at WGU. But it is my understanding that you need to memorize a lot. Ports vs Protocols, topologies, cable types with corresponding mode/distances. As Boxxer stated, your best bet is to go through the exam objectives. You already know the way the questions are presented. And you will likely have at least a few repeat questions. However there is a very large bank of testing questions that you randomly get. So you will get a lot of new ones.
Here is a video that talks about pbqs in regards to the Security+ however I imagine they are similar for all of the Comptia exam questions.
http://blogs.getcertifiedgetahead.com/comptia-performance-based-testing/ -
Options
PJ_Sneakers Member Posts: 884 ■■■■■■□□□□
I'm pretty sure you can get a performance based question wrong and still pass the exam. -
Options
AndersonSmith Member Posts: 471 ■■■□□□□□□□
I'm not going to discuss anything that breaks CompTIA NDA, but I will say that the Performance Based Questions aren't really a big deal. Actually, I think they were easier than the Multiple Choice ones. It's been over 4 years since I took it so they may have gotten more difficult but if you study hard enough you'll be fine. Try some practice tests from Transcender or MeasureUp and you'll be ok.All the best,
Anderson
"Everything that has a beginning has an end" -
Options
JohnnyUtah41 Member Posts: 34 ■■□□□□□□□□
the performance based questions are definitely odd and the real problem is trying to figure out what they are asking. With that said, the technology commands or changes you have to make are easy. It's no where as difficult as taking the ccna or ccna security exams