Options

NAT Interface - Static Route

enclaveenclave Member Posts: 1 ■□□□□□□□□□
in CCNA & CCENT
I want to make sure that I'm doing this right. I have a default primary router on a 192.168.1.0 network and another router with a fe interface on the same network. So the second router interface is 192.168.1.7 and it NATs to 192.168.255.79. I want to put a route in the primary router to direct traffic for the 192.168.255 netowrk to go through the 1.7 interface. So I should put in the route to look like this:

192.168.255.0 255.255.255.0 fastethernet0/0 192.168.1.7

Would this be right?
· Share on FacebookShare on Twitter

Comments

  • Options
    pannupanditpannupandit Member Posts: 92 ■■□□□□□□□□
    well enclave can u elaborate ...or can u send the diagram so that we can make a clear picture of ur network.and do make some more explantion of the problem.
    regards
    pannu
    · Share on FacebookShare on Twitter
  • Options
    pannupanditpannupandit Member Posts: 92 ■■□□□□□□□□
    ur defined route will work fine..if 2nd router is in between network 192.168.1.0 and 192.168.255.0 i.e. if there is no NAT configured on 2nd router
    · Share on FacebookShare on Twitter
Sign In or Register to comment.