router timeouts

Why is that when im loading a IOS from tftp. It says loading seems like its working fine and then it says "timed out" "failed"

Find more posts tagged with

Free for TechExams community: Cybersecurity salary guide

Compare cert salaries and plan your next career move

Button

Comments

MALLYG34

this is what my message looks like.

ZxR6#show flash

System flash directory:
File Length Name/status
1 8108960 c2500-js-l_112-17.bin
[8109024 bytes used, 279584 available, 8388608 total]
8192K bytes of processor board System flash (Read ONLY)

ZxR6#copy tftp flash
**** NOTICE ****
Flash load helper v1.0
This process will accept the copy options and then terminate
the current system image to use the ROM based image for the copy.
Routing functionality will not be available during that time.
If you are logged in via telnet, this connection will terminate.
Users with console access can see the results of the copy operation.
---- ******** ----
Proceed? [confirm]y

System flash directory:
File Length Name/status
1 8108960 c2500-js-l_112-17.bin
[8109024 bytes used, 279584 available, 8388608 total]
Address or name of remote host [192.168.0.101]?
Source file name? c2500-i-l.120-7.bin
Destination file name [c2500-i-l.120-7.bin]?
Accessing file 'c2500-i-l.120-7.bin' on 192.168.0.101...
Loading c2500-i-l.120-7.bin ... [timed out]
[failed]

mikej412

Have you gone into your TFTP server and configured security (solarwinds: file->configure->security tab)? Can it transmit and receive files (if you're using SolarWinds)?

MALLYG34

yes i have configured the the security and it still happens

Kaminsky

How big is the new IOS and does the router have space for it?

mikej412

Are you on the same subnet as the TFTP server? Can you ping it from the router?

MALLYG34 wrote:

This process will accept the copy options and then terminate
the current system image to use the ROM based image for the copy.
Routing functionality will not be available during that time.

If you're not on the same subnet, you may need to define a default gateway since you will lose routing.

MALLYG34

there on the same subnet but i cant ping it

mikej412

MALLYG34 wrote:

there on the same subnet but i cant ping it

Then you need to trouble shoot the network connectivity issue, rather than a TFTP issue. If you can't talk to it on the network, you can't TFTP.

Cable? ACLs? VLANs?

Are you on a network? Directly connected with a crossover cable? Transceiver lights?

What are the IP addresses and subnet masks? Anything in the arp cache on the TFTP server or Router (can they see each other at layer 2 and find each other at layer 3)?

MALLYG34

Im on a network.Its my home lab. Im plugged into my router with my wireless laptop. Im plugged in to the router with a console cable.

oliverw

Hi Mally,

Try assigning an ip address to the router (like 192.168.1.1 /24).

Assigning an ip address on your pc (like 192.168.1.2 /24)

Connect to each other like this

ROUTER----SWITCH

PC
or
ROUTER----CROSS OVER CABLE----PC

kenny504

Try temporarily disabling your anti-virus on your desktop- or whichever achine has tftp server. Just to rule out that layer. Then work your way down. I've heard of this before and Anti-virus programs such as norton sometimes denies a ping and even connectivity from certain hosts.....seeing that tftp is a program also...it seems feasible to behave like that.

cambei

MALLYG34, is the only connection your Cisco router (the one you are trying to update) has to any machine on the network via a console cable? Becuase that is the impression I got from your last post. If so, this is not a network connection so tftp would not work over the console connection.

Please provide a simple diagram of your network.

MALLYG34

Sorry for not replying but i have already solved this problem. What i was doing wrong was using a straight cable from the transciever on the router to my laptop. Didnt know i needed a crossover cable.

Paul Boz

That's a handy thing to know for the CCNA exam. You will most sertainly have to know how to propperly cable internetworking devices. The only reason you don't have to use a crossover cable with most home DSL and Cable modems (there are manufacturers like Zyxel for example, that use crossover cables) is that the uplink port on the modem is "crossed over."

Router to host: Crossover
Console to router: rollover
Switch to host: straight through

Just remember that DTE to DTE is crossover and you'll be fine.