Flash is Too Full

Could someone please let me know for sure how to update the flash on a Switch (2900 series) when there is not enough room available, i.e how to remove old Flash to copy a new one and boot from that.

I have heard different opinions which are all very confusing ??

Many Thanks.

Find more posts tagged with

Free for TechExams community: Cybersecurity salary guide

Compare cert salaries and plan your next career move

Button

Comments

forbesl

Downloading sofware using TFTP

J2tehk

I had to do this with my 2520. Boot to ROM mode and erase flash.

Change the confreg back to 0x2102
rommon 1 > confreg 0x2102
rommon 2 > reset

This will take you to boot mode. From here you can assign an interface with an IP address and use TFTP to download the new IOS.

darkuser

links are cool

davmck5665

That sounds good. I'll give It a Go !!

Many Thanks.

forbesl

J2tehk wrote:

I had to do this with my 2520. Boot to ROM mode and erase flash.

Change the confreg back to 0x2102
rommon 1 > confreg 0x2102
rommon 2 > reset

This will take you to boot mode. From here you can assign an interface with an IP address and use TFTP to download the new IOS.

He is performing this on a switch, not a 2500 series router. The procedure is different.

Quick Links

All Categories
Recent Posts
Activity
Unanswered
Groups
Best Of