OSPF / LAN question in Packet Tracer
BartlettNWU
Registered Users Posts: 1 ■□□□□□□□□□
in CCNA & CCENT
Hi,I'm trying to setup a WAN in packet tracer. I need to use OSPF and I'm able to ping between my WAN routers and inside each LAN, but now outside the LAN. I've set up OSPF first on the routers and VLANs on all the LAN segments.Thanks in advance.
Comments
-
networkfuzz
Member Posts: 14 ■□□□□□□□□□
It’s difficult to determine what the issue is with the info you’ve provided. Do you have ospf neighbor adjacencies? Show ip ospf neighbors, show ip route ospf? What are your router configs? -
slinuxuzer
Member Posts: 665 ■■■■□□□□□□
A common issue people run into when first learning routing is they neglect in install routes on each end of the routing equation, so you end up where you can route to a network, but that network or router on the other end doesn't know how to get back to you. Check both end and make sure you know how to reach each network from each direction. -
Mooseboost
Member Posts: 778 ■■■■□□□□□□
Could be a few things. We will need to see configurations or output in order to fully help you.