Options

Missing Component

sam88sam88 Member Posts: 60 ■■■□□□□□□□
in CCNP Collaboration
CCNA VOICE LAB - SAM
**********************
Hi Everyone,

I need help about the missing component. Below I’m sharing the details about my inventory. Please help me. I'm not setting up this lab for ccna collaboration. I need this lab ccna and ccnp voice. Later i'll add 2911. I'm getting one HWIC-D-9ESW 9 PORT SWITCH MODULE. Hope I can use this module with my 2821 router. What is the benefit of adding this module. I don't have VIC2-2FXS. Is it mandatory to get one for the lab.

Here is my inventory.

[IMG]file:///C:/Users/PROFES~1/AppData/Local/Temp/msohtmlclip1/01/clip_image002.jpg[/IMG]
************
HQ: 2821
VWIC2-2MFT-T1/E1 x ?
PVDM2- ? x ?
256mb + 512 mb Ram + 256 mb Flash
IOS- c2800nm-adventerprisek9-mz.151-4.M12a.bin

BR1: 2811
VWIC2-2MFT-T1/E1 x ?
PVDM2- ? x ?
256mb + 128mb Flash

BR2: 2811
VWIC2-2MFT-T1/E1 x ?
PVDM2- ? x ?
256mb + 128 mb

PSTN: 2811
VWIC2-2MFT-T1/E1 x ?
VIC2-4FXO ?
PVDM2- ? x ?
256mb + 128 mb Flash

[IMG]file:///C:/Users/PROFES~1/AppData/Local/Temp/msohtmlclip1/01/clip_image004.jpg[/IMG]
************
Switch: 3750 48 PT PoE

Switch: 3550 24 PT (Non PoE)
(IOS- c3550-i9q3l2-mz.121-22.EA7/c3550-i9q3l2-mz.121-22.EA7.bin)

Switch: 2950 24 PT (Non PoE)
(IOS- c2950-i6q4l2-mz.121-19.EA1c.bin)


[IMG]file:///C:/Users/PROFES~1/AppData/Local/Temp/msohtmlclip1/01/clip_image005.png[/IMG]
**********
1- 7942
2- 7942
3- 7942

Modules & Cables-
***********
VWIC2-2MFT-T1/E1 x 7
WIC-2T x 2
1 ISDN Basic Rate interface x 1
1 ISDN Basic Rate interface x 1 v3
DB60 DTE/DCE x 1
PVDM-256K-4 x 1 (old)
PVDM-256K-4 x 1 (old)
PVDM2-16 DSP x 2
PVDM2-64 DSP x 6
VIC2-4FXO x 2

Router 1841 [2FE] [256/64 CF]
(IOS- c1841-adventerprisek9-mz.151-4.M12a.bin)

Cisco 1841 with 237568K/24576K bytes of memory.
Processor board ID
2 FastEthernet interfaces
2 Virtual Private Network (VPN) Modules
DRAM configuration is 64 bits wide with parity disabled.
191K bytes of NVRAM.
62720K bytes of ATA CompactFlash (Read/Write)

Switch 3550 - 24 PT

Switch 2950- 24 PT

[IMG]file:///C:/Users/PROFES~1/AppData/Local/Temp/msohtmlclip1/01/clip_image007.png[/IMG]
*********
PC 2.7 Ghz
CUCM 9.x installed (PUB).

Laptop
Cucm 9.x Installed (PUB)

Later i'll change one of them to Sub . Currently both are individual call managers.
· Share on FacebookShare on Twitter

Comments

  • Options
    negru_tudornegru_tudor Member Posts: 473 ■■■□□□□□□□
    Use this as a guideline for what machines & hardware you may need. It's all up to you.

    I recommend using at least CUCM, Unity & IM&P 10.5

    ztz1OBt.jpg
    2017-2018 goals:
    [X] CIPTV2 300-075
    [ ] SIP School SSCA
    [X] CCNP Switch 300-115 [X] CCNP Route 300-101 [X] CCNP Tshoot 300-135
    [ ] LPIC1-101 [ ] LPIC1-102 (wishful thinking)
    · Share on FacebookShare on Twitter
  • Options
    sam88sam88 Member Posts: 60 ■■■□□□□□□□
    Thanks for your response. This topology is far from my understanding. It has everything VCS-C,VCS-E, TMS.
    · Share on FacebookShare on Twitter
  • Options
    negru_tudornegru_tudor Member Posts: 473 ■■■□□□□□□□
    sam88 wrote: »
    Thanks for your response. This topology is far from my understanding. It has everything VCS-C,VCS-E, TMS.

    Focus on the servers & voice gateways. Leave VCS & TMS out.
    2017-2018 goals:
    [X] CIPTV2 300-075
    [ ] SIP School SSCA
    [X] CCNP Switch 300-115 [X] CCNP Route 300-101 [X] CCNP Tshoot 300-135
    [ ] LPIC1-101 [ ] LPIC1-102 (wishful thinking)
    · Share on FacebookShare on Twitter
  • Options
    sam88sam88 Member Posts: 60 ■■■□□□□□□□
    Hi Tudor,


    Thanks for your support. I'm still not sure what modules i'm missing with. If you can share any lab manual brandonlove21@gmail.com to study the course.


    What I have available now and about to come?
    If I'm missing with any module. Please let me know so, that I can ship all the items together. I already spent too much on an international shipping.Thanks Tudor. I have download the ova from Eve-NG.However, enough resources is not available with the current server. I think I have to wait for 45 days to get the Ram and HDD for my server.


    3 x 2811 router 128MB Flash & 256 MB Dram
    1 x 2821 router 256MB Flash & 512 MB Dram
    2 x 3550 - 24PT
    1 x 3750 V2 PoE - 48 PT
    1 Server IBM X3650 7979
    3 X 7942 (Total 6 Phones I have. If it's not enough. I will order couple of them. In diagram you're using 7 phones.)
    3 x 7960
    6 X PVDM2- 64
    2 X PVDM2-16
    7 X VWIC-2MFT-T1/E1
    1 X VWIC-1MFT-T1/E1
    2 X VIC2-4FXO
    2 X VIC-2FXS
    3 X WIC-2T
    1 ISDN Basic Rate interface x 1
    1 ISDN Basic Rate interface x 1 v3
    SAMSUNG Server Memory 64GB (16 x 4GB) PC2-5300F DDR2
    2 X 300 GB Server Hard Drive
    2 X Cisco HWIC-D-9ESW 9-Port Switch Network Card
    1 X Cisco VOICE 2V Module with TWO VIC-2FXS 2-Port Cards
    1 PC 3GB Ram 500GB HDD
    1 Laptop 6GB Ram I3
    · Share on FacebookShare on Twitter
Sign In or Register to comment.