Would this be useful in a voice lab?

Would the EM ports be useful? I already have a 2610 with 4-port ISDN cards, but not sure if that will be useful either. Anyway, please look at the description of the router and let me know if this would be useful in a voice lab.

System Bootstrap, Version 12.0(6r)T, RELEASE SOFTWARE (fc1)



Cisco Internetwork Operating Sy
Copyright (c) 1999 by cisco Systems, Inc.
Building configuration...0 Software (C
C3660 processor with 262144 Kbytes of main memory1)
!
version 12.2
Main memory is configured to 64 bit mode with parity disabledo Systems,
service timestamps log uptime

program load complete, entry point: 0x80008000, size: 0xb0eeb4
!
hostname Routerase: 0x600089C0
!d
!a
memory-size iome
Self decompressing the image : #################################################(revision 1.0) with 90112K/8192K bytes of memory.
######################################################################### [OK]
R527x CPU at 225Mhz, Implementation 40, Rev 10.0

Smart Init is disabled. IOMEM set to: 10

Using iomem percentage: 10
X.25 software, V

170 West Tasman Drive


Compiled Wed 01-Mar-06 23:50 by pwade
Image text-base: 0x60008940, data-base: 0x611A0000

cisco 3660 (R527x) processor (revision 1.0) with 236544K/25600K bytes of memory.

Processor board ID ***********
R527x CPU at 225Mhz, Implementation 40, Rev 10.0, 2048KB L2 Cache
Bridging software.
X.25 software, Version 3.0.0.
SuperLAT software (copyright 1990 by Meridian Technology Corp).


3660 Chassis type: ENTERPRISE
1 FastEthernet/IEEE 802.3 interface(s)
4 Serial network interface(s)
12 Voice E & M interface(s)
DRAM configuration is 64 bits wide with parity disabled.
125K bytes of non-volatile configuration memory.
16384K bytes of processor board System flash (Read/Write)

Comments

Sign In or Register to comment.