Options
cat3550/3560 per port traffic limiting.
I got assigned to configure port traffic limiting on some 3550 and 3560s, and currently i dont have anything to lab with so i'll try asking here.
This could be done with policy-maps, right? I've googled around a bit and it seems to work for ingress and egress on the 3550, but just on the ingress on 3560?
I also found this img: http://www.cisco.com/warp/public/473/153-2.gif which I guess says that it should work to match acls and police them ingress, but not egress.
Am I going the right way here?
This could be done with policy-maps, right? I've googled around a bit and it seems to work for ingress and egress on the 3550, but just on the ingress on 3560?
I also found this img: http://www.cisco.com/warp/public/473/153-2.gif which I guess says that it should work to match acls and police them ingress, but not egress.
Am I going the right way here?
Comments
-
Options
NetworkGod
Member Posts: 236 ■■■□□□□□□□
You know, that actually got me pretty curious, i looked in my BCMSN book and it didn't say anything about it so i decided to ask some people around and these are replies i got:
: look for a ciscopress book named "End to End QOS"
: quickest dirtiest method I use is just tx/rx queues.
: there are several options, but they all will police/rate limit and not shape, which means packets will get dropped and sessions might suffer
Hope that helps, good question by the way!!What one man can do another can do.
(\__/)This is Bunny. Copy and paste bunny into
(='.'=)your signature to help him gain world
(")_(")domination.
- CCNA - CCDA - BCMSN - BSCI -
- 70-270 -