Any 2509 IOS version for TS? (cant suspend session now)

Is any version of the 2509 IOS capable of being used as a TS server or is there only one version of IOS that supports this feature?

Find more posts tagged with

Save $250 on 2025 certification boot camps from Infosec!

Book now with code EOY2025

Button

Comments

Netstudent

As long as you can create a Host table then you can make it a terminal server. TS isn't a feature set that is specific to some IOS. It's just a method of congiruing a HOstable on a router that has an Octal cable connection.

http://www.cisco.com/warp/public/793/access_dial/comm_server.html

dtlokee

As long as it runs IP you're good.

for the configuration of the terminal lines you really only need to disable the exec to make it work, on some older ios versions you want to use the "flush-at-activation" command

line 1 8
no exec
flush-at-activation
transport input all

additionally you can use a "session-timeout 10" command to cause the session to timeout after 10 minutes of inactivity.

After this, put an IP address in the ethernet interface and you're ready to revers telnet to the devices connected to the term server

Remember to use the 2000 + the line number for the tcp port

telnet 10.1.1.1 2001

That would telnet the device on line 1

HTH

Delirious

Thanks for the quick replies, link, and tips guys!

I was just wondering if 12.3.19 would be capable and now that i know its not a specific feature of any one IOS ill give it a try.

Delirious

Ok i configured the 2509 as recomended above however when i telnet to one of the routers useing ctrl-shift-6 x doesnt suspend the session and i am stuck in the router i telneted to.

Im connecting to the 2509 via telnet and its configured:

Aux port is set as 192.168.1.1 and the computer i telnet from is on the same subnet.

loopback address is 10.0.0.10 255.255.255.0 (lab network is 10.0.0.0)

line 1 8
no exec
transport input all

ip host R1 2001 10.0.0.10

I can telnet to R1 using "telnet r1 2001" and once i get into R1 i am unable to go back to the 2509.

Am i overlooking something here?

Netstudent

have you tried the telnet "Quit" command from privileged mode?

Delirious

Netstudent wrote:

have you tried the telnet "Quit" command from privileged mode?

no i didnt try that, ill give it a try when i get home, im at work

Delirious

Delirious wrote:

Netstudent wrote:

have you tried the telnet "Quit" command from privileged mode?

no i didnt try that, ill give it a try when i get home, im at work

Quit pretty much **** me out of the router, i get this message

"r3 con0 is now available"

"press RETURN to get started"

pressing return takes me back to the 2610 and not the 2509.

Heres the 2509 config

Cisco 2509 TS1

User Access Verification

Password:
TS1>en
Password:
TS1#sh run
Building configuration...

Current configuration : 1001 bytes
!
version 12.3
service timestamps debug uptime
service timestamps log uptime
no service password-encryption
!
hostname TS1
!
boot-start-marker
boot-end-marker
!
enable secret
!
no aaa new-model
ip subnet-zero
ip host R1 2001 10.0.0.10
ip host R2 2002 10.0.0.10
ip host R3 2003 10.0.0.10
ip host S1 2004 10.0.0.10
ip host S2 2005 10.0.0.10
ip host S3 2006 10.0.0.10
!
username cisco privilege 15 password 0 cisco
username cisco2 privilege 15 password 0 cisco2
!
!
!
interface Loopback0
ip address 10.0.0.10 255.255.255.0
!
interface Ethernet0
ip address 192.168.1.1 255.255.255.0
fair-queue
!
interface Serial0
no ip address
shutdown
!
interface Serial1
no ip address
shutdown
!
no ip http server
ip classless
!
!
!
banner motd ^C Cisco 2509 TS1 ^C
!
line con 0
password cisco
logging synchronous
login
line 1 8
no exec
transport input all
line aux 0
password cisco
logging synchronous
login
line vty 0 4
password cisco
logging synchronous
login
!
end

TS1#

Delirious

Ok i figured it out, stupid mistake, i had the loopback set as 10.0.0.10 255.255.255.0 and all the routers and switches as 255.0.0.0 .

Netstudent

Well at least you figured it out on your own. Lessoned learned right!

Delirious

Netstudent wrote:

Well at least you figured it out on your own. Lessoned learned right!

most definetly!

manic

umm hmm nvm i didnt read your post right lol but my motd is better

banner motd ^C
MANIC Labs Inc. Authorized personel only.
Attempted unauthorized access can result in criminal prosecution.

All remote activity will be logged for security purposes.^C
!