Options
Frame-relay switch!
It is there a device that can act as a frame-relay switch? I am tired of configuring frame-relay switching everytime I want to set up a frame-relay. That would save me like 5 minutes if I had a device which can perform a frame-relay switching on its own
Comments
-
Options
MACattack
Member Posts: 121
You can use cisco 2501 with 4 serial interface, this help me a lot during my BSCI days. Anyway I didn't try dynamips but if I could remember in there sample labs it is available. -
Options
keenon
Member Posts: 1,922 ■■■■□□□□□□
what are you using software or actual hardware..
if actual hardware look on ebay for a 2520 or something in that version with many serial interfaces. I currently use a 4000 router with 12 serial interfaces for my frame switchBecome the stainless steel sharp knife in a drawer full of rusty spoons -
Optionssupercooldude
Member Posts: 49 ■■□□□□□□□□
I believe dedicated hardware frame realay switches do exist but are used by service providers, and are very expensive.mysql1988 wrote:It is there a device that can act as a frame-relay switch? I am tired of configuring frame-relay switching everytime I want to set up a frame-relay. That would save me like 5 minutes if I had a device which can perform a frame-relay switching on its own
If you're tired of configuring frame-relay eveytime, you could however save your frame-realy switching config on a tftp server and load it whenever you need it, or in a text file and copy/paste it into your console terminal. Some routers even let you save your config to flash!!
Good luck
-
Options
Paul Boz
Member Posts: 2,620 ■■■■■■■■□□
CCNP | CCIP | CCDP | CCNA, CCDA
CCNA Security | GSEC |GCFW | GCIH | GCIA
pbosworth@gmail.com
http://twitter.com/paul_bosworth
Blog: http://www.infosiege.net/ -
Options
mwgood
Member Posts: 293