640-802

liven

Correct me if I am wrong, but is the640-802 the only test needed to get a CCNA?

Find more posts tagged with

Save $250 on 2025 certification boot camps from Infosec!

Book now with code EOY2025

Button

Comments

wait2dominate

liven wrote:

Correct me if I am wrong, but is the640-802 the only test needed to get a CCNA?

That is correct. Right now, the test is the 640-801, which is available until 11/6/07.
The test replacing that is the 640-802, which is avialable starting 8/1/07.

http://www.cisco.com/web/learning/le3/le2/le0/le9/learning_certification_type_home.html

liven

I have a 2500 router, will this be enough to study for either of these exams?

Also how long is each one valid for?

markzab

You should really check out the FAQ.

But you're probably going to want more than just your 2500 to lab it up for the NA.

tech-airman

liven wrote:

I have a 2500 router, will this be enough to study for either of these exams?

Also how long is each one valid for?

liven,

Based on what I know:

a 2500 router for the 640-801 CCNA is ok.
a 2500 router for the 640-802 CCNA is NOT ok.

markzab

tech-airman wrote:

liven wrote:

I have a 2500 router, will this be enough to study for either of these exams?

Also how long is each one valid for?

liven,

Based on what I know:
a 2500 router for the 640-801 CCNA is ok.

a 2500 router for the 640-802 CCNA is NOT ok.

He's not going to get much in regards to routing protocols or switch commands or much of anything really with only 1 router.

Netstudent

I think that depends on how much backround experience you have with cisco gear.

If you have never worked with cisco gear on the job, and you are trying to get certified so that maybe you will get a networking job, 1 router is not enough. Maybe 1 router and a simulator, which still it would be pointless to have only 1 router and a simulator. I mean this is a networking certification, how do you network 1 router??????? You can't.

If you are really wanting to learn and get some hands on, get more gear, buy a simulator, or download dynamips.

Now the model is fine, but the number of routers is not.

markzab

I think getting a switch or 2 is also important in regards to learning layer 2 technologies. Sure you can memorise from a book but that defeats the whole purpose of why we're here.

Netstudent

I agree....Especially with STP. IF the test really wanted to, it could throw you an STP riddle from hell. Some of the ICND practice questions have some moderate PVST as well. having 3 switches to create a loop, and then playing around with rootbridge elections and port costs to see how the spaning-tree topology changes is good practice. To me, STP is one of those things that is hard to master without having some switches or a simulator. And still with only 3 switches, STP can get a lot more complex than what 3 switches has to offer. But it's probably good enough for CCNA level studies.

liven

my bad,

I have been working with cisco gear on and off for a while now... Around 5 years.

In fact I manage a couple of catalyst switches at work, I have studied for this test several times and was ready to sit for it 2 times... Just never made the plunge...

I would like to sit for it now and get it over with before the switch to the new exam...

Thanks for your replies