Password recovery problem with C2912

osiris69osiris69 Member Posts: 12 ■□□□□□□□□□
System image file is "flash:/c2900XL-h2s-mz-120.5.1-XP.bin"

cisco WS-C2912-XL (PowerPC403GA) processor (revision 0x11) with 8192/1024K bytes of
memory.
Processor board ID 0x0D, with hardware revision 0x01
Last reset power-on

Processor is running Enterprise Edition Software
Cluster member switch capable
12 FastEthernet/IEEE 802.3 interfaces (s)

32K bytes of flash-simulated non-volatile configuration memory
Base ethernet MAC Address: 00:B0:64:F2:63:40
Motherboard assembly number: 73-3397-07
Power supply part number: 34-0834-01
Motherboard serial number: FAB040364PZ
Power supply serial Number: DAB13504G2F
Model revision number: A0
Model number: WS-C2912-XL-A
System serial number: FAB0404U0T6

Configuration register is 0xF

When going through step-by -step icon_evil.gificon_evil.gificon_evil.gificon_evil.gificon_evil.gif

flash_init - load-helper - etc all goes alright until it is booted. You cannot type "n" because you are not at the initial configuration dialog.(where you are supposed to be according to all documentation I have read)) Instead, after booting it is as it goes into a normal start and needs the password to enter enable mode. I suspect the problem is the Config Reg setting

Anyone got any ideas?

Comments

  • dtlokeedtlokee Member Posts: 2,378 ■■■■□□□□□□
    after you type in flash_init and load_helper did you rename or delete the config file from flash?
    The only easy day was yesterday!
  • osiris69osiris69 Member Posts: 12 ■□□□□□□□□□
    dtlokee wrote:
    after you type in flash_init and load_helper did you rename or delete the config file from flash?

    Rename. I think I may know what the problem is now but I do not know how to rectify it.

    Directory of flash: /

    002. -rwx. 1369573. Mar 01 1993. 00:02:06. c2900XL-h2-mz-120.5.1-XP.bin

    003. -rwx. 102893. Dec 10 1999. 19:12:29. c2900XL-diag-mz-120.5.1-XP

    004. drwx. 11072. Dec 10 1999. 19:12:29. html

    179. -rwx. 660. Mar 01 1993. 00:02:27. vlan.dat

    180. -rwx. 4037. Jul 25 2000. 08:31:38. config.old

    181. -rwx. 1490614. Mar 01 1993. 00:05:04. c2900XL-h2s-mz-120.5.1-XP.bin

    182. -rwx. 892. Mar 01 1993. 00:05:57. config.text

    184. -rwx. 324 Jan 01 1970. 00:04:36. env_vars

    3612672 bytes total (108544 bytes free)

    The switch is using the c2900XL-h2s ios and it is compressed. Could this be why I can't get in?[/url]
  • georgemcgeorgemc Member Posts: 429
    osiris69 wrote:
    Rename. I think I may know what the problem is now but I do not know how to rectify it.

    Directory of flash: /

    002. -rwx. 1369573. Mar 01 1993. 00:02:06. c2900XL-h2-mz-120.5.1-XP.bin

    003. -rwx. 102893. Dec 10 1999. 19:12:29. c2900XL-diag-mz-120.5.1-XP

    004. drwx. 11072. Dec 10 1999. 19:12:29. html

    179. -rwx. 660. Mar 01 1993. 00:02:27. vlan.dat

    180. -rwx. 4037. Jul 25 2000. 08:31:38. config.old

    181. -rwx. 1490614. Mar 01 1993. 00:05:04. c2900XL-h2s-mz-120.5.1-XP.bin

    182. -rwx. 892. Mar 01 1993. 00:05:57. config.text

    184. -rwx. 324 Jan 01 1970. 00:04:36. env_vars

    3612672 bytes total (108544 bytes free)

    The switch is using the c2900XL-h2s ios and it is compressed. Could this be why I can't get in?[/url]


    As long as config.text exists in flash, the switch is going to boot from it. Rename the config.text to something else (i.e, config.old) while stepping through the documented procedures again.
    WGU BS: Business - Information Technology Management
    Start Date: 01 October 2012
    QFT1,PFIT in progress.
    TRANSFERRED/COMPLETED: AGC1,BBC1,LAE1,QBT1,LUT1,QLC1,QMC1,QLT1,IWC1,INC1,INT1,BVC1,CLC1,MGC1, CWV1 BNC1, LIT1,LWC1,QAT1,WFV1,EST1,EGC1,EGT1,IWT1,MKC1,MKT1,RWT1,FNT1,FNC1, BDC1,TPV1 REQUIRED:
  • dtlokeedtlokee Member Posts: 2,378 ■■■■□□□□□□
    osiris69 wrote:
    dtlokee wrote:
    after you type in flash_init and load_helper did you rename or delete the config file from flash?

    Rename. I think I may know what the problem is now but I do not know how to rectify it.

    Directory of flash: /

    002. -rwx. 1369573. Mar 01 1993. 00:02:06. c2900XL-h2-mz-120.5.1-XP.bin

    003. -rwx. 102893. Dec 10 1999. 19:12:29. c2900XL-diag-mz-120.5.1-XP

    004. drwx. 11072. Dec 10 1999. 19:12:29. html

    179. -rwx. 660. Mar 01 1993. 00:02:27. vlan.dat

    180. -rwx. 4037. Jul 25 2000. 08:31:38. config.old

    181. -rwx. 1490614. Mar 01 1993. 00:05:04. c2900XL-h2s-mz-120.5.1-XP.bin

    182. -rwx. 892. Mar 01 1993. 00:05:57. config.text

    184. -rwx. 324 Jan 01 1970. 00:04:36. env_vars

    3612672 bytes total (108544 bytes free)

    The switch is using the c2900XL-h2s ios and it is compressed. Could this be why I can't get in?[/url]

    yeah you need to rename the config.text file to somthing different after you enter flash_init, and load_helper
    rename flash:/config.text flash:/config.old
    

    after you rename it use the "boot" command to boot the switch
    The only easy day was yesterday!
  • NetstudentNetstudent Member Posts: 1,693 ■■■□□□□□□□
    but what if he already has a file named config.old. It will give him an error stating that when he tries to rename config.text. This happned to me. Delete the config.old or copy config.text to something different than config.old.
    There is no place like 127.0.0.1 BUT 209.62.5.3 is my 127.0.0.1 away from 127.0.0.1!
  • networker050184networker050184 Mod Posts: 11,962 Mod
    I think you answered your own question on that one!
    An expert is a man who has made all the mistakes which can be made.
  • NetstudentNetstudent Member Posts: 1,693 ■■■□□□□□□□
    well I didn't ask for myself because I did already experience this. I asked the question to spark a thought from others.
    There is no place like 127.0.0.1 BUT 209.62.5.3 is my 127.0.0.1 away from 127.0.0.1!
  • osiris69osiris69 Member Posts: 12 ■□□□□□□□□□
    Netstudent wrote:
    well I didn't ask for myself because I did already experience this. I asked the question to spark a thought from others.
    :D:D:D:DTHANK YOU SIR SPOT ON!!!

    Once I deleted config.old it all went through OK

    What threw me was I tried to delete something else and got permission denied

    All sorted now so Thank you again :D:D:D:D
  • NetstudentNetstudent Member Posts: 1,693 ■■■□□□□□□□
    your welcome. I'ts amazing how much you learn with your own gear, and how much more you have to learn.
    There is no place like 127.0.0.1 BUT 209.62.5.3 is my 127.0.0.1 away from 127.0.0.1!
Sign In or Register to comment.