Options
Someone please ANSWER! Can't be that hard.
deviantlifex
Member Posts: 7 ■□□□□□□□□□
in CCNP
Hey whatsup guys, my co-worker and I are debating on how to setup the physical frame-relay connection for a new lab. Using 4 routers. 3 outer laying routers and 1 in the middle as FR switch.
We have 4 routers each with a T1 interface card.
Now we need to know whether we could simulate a frame relay connection between 3 routers and 1 router in the middle as the FR switch using 3 T1 interfaces on the FR switch in the middle and 1 T1 card in each other router connecting straight to the FR switch.
OR
would is be better using a WIC-1T card on 3 routers connecting to a FR switch in the middle with a NM-8A/S card.
We have 4 routers each with a T1 interface card.
Now we need to know whether we could simulate a frame relay connection between 3 routers and 1 router in the middle as the FR switch using 3 T1 interfaces on the FR switch in the middle and 1 T1 card in each other router connecting straight to the FR switch.
OR
would is be better using a WIC-1T card on 3 routers connecting to a FR switch in the middle with a NM-8A/S card.
Comments
-
OptionsNetstudent Member Posts: 1,693 ■■■□□□□□□□It would be cheaper to go the WIc-1t route. I don;t think one option is better or worse. I'm pretty sure you can create a frame switch with mulitple T1 cards in the frame switch. I think you would create the frame routes between the T1 interfaces just like any other serial inetrface on a frame switch.. You may want to ghost that other post.There is no place like 127.0.0.1 BUT 209.62.5.3 is my 127.0.0.1 away from 127.0.0.1!
-
Optionstech-airman Member Posts: 953deviantlifex wrote:Hey whatsup guys, my co-worker and I are debating on how to setup the physical frame-relay connection for a new lab. Using 4 routers. 3 outer laying routers and 1 in the middle as FR switch.
We have 4 routers each with a T1 interface card.
Now we need to know whether we could simulate a frame relay connection between 3 routers and 1 router in the middle as the FR switch using 3 T1 interfaces on the FR switch in the middle and 1 T1 card in each other router connecting straight to the FR switch.
OR
would is be better using a WIC-1T card on 3 routers connecting to a FR switch in the middle with a NM-8A/S card.
deviantlifex,
Which specific router model(s) do you have? -
Optionsmikej412 Member Posts: 10,086 ■■■■■■■■■■Triple post
http://www.techexams.net/forums/viewtopic.php?t=28768
http://www.techexams.net/forums/viewtopic.php?t=28780:mike: Cisco Certifications -- Collect the Entire Set!
This discussion has been closed.