Options
CCNA - Help Please!
mercanedees
Member Posts: 10 ■□□□□□□□□□
in CCNA & CCENT
I am a little confused. I have just failed the ICND (score:772) for the second time.
First time - my results were as follows:
Planning & Design 60%
Implementation & Operation 82%
Troubleshooting 50%
Technology 80%
Second time - my results were as follows:
Planning & Design 100%
Implementation & Operation 45%
Troubleshooting 90%
Technology 50%
Apart from the bizarre results above the really sad thing is that when answering the one router simulation question, the simulator refused to accept any of my config commands (ACL commands) so I had to pass without answering and pass up on any (significant?) points. I would not mind, but I studied well for this and feel, well - deflated.
Any advice - from anyone, would be greatly appreciated.
First time - my results were as follows:
Planning & Design 60%
Implementation & Operation 82%
Troubleshooting 50%
Technology 80%
Second time - my results were as follows:
Planning & Design 100%
Implementation & Operation 45%
Troubleshooting 90%
Technology 50%
Apart from the bizarre results above the really sad thing is that when answering the one router simulation question, the simulator refused to accept any of my config commands (ACL commands) so I had to pass without answering and pass up on any (significant?) points. I would not mind, but I studied well for this and feel, well - deflated.
Any advice - from anyone, would be greatly appreciated.
Comments
-
Optionshalflife78
Member Posts: 122
So you skipped one of the sims? If you did that is a main reason you score was a bit low, the sims count for more than anything else on the test I believe. I failed my CCNA the first time by 2 points because I missed one of my router sims, second time I got em both right and got a 927.
-
Optionsmercanedees
Member Posts: 10 ■□□□□□□□□□
Thanks for reply.
Having calmed down now, I will obviously have to perform more router simulation exercises - especially for ACLs.