Options
STP -Spanning Tree Protocol
onecert
Member Posts: 4 ■□□□□□□□□□
What is the simplest way to figure out a DP designated port for all switches participating in the Spanning-Tree. I understand Root Brigde and RP selections.
Comments
-
OptionsGT-Rob
Member Posts: 1,090
nvm
If you use the command
show spanning-tree interface whatever port it will give you the roles of each port per vlan, and show which ports are desg -
Options
networker050184
Mod Posts: 11,962 Mod
If its forwarding and not a root port its a designated port.An expert is a man who has made all the mistakes which can be made. -
Optionsonecert
Member Posts: 4 ■□□□□□□□□□
networker050184 wrote:If its forwarding and not a root port its a designated port.
Sounds simple, but what complicates me is when they say Designated bridge and Designated Port for each segment. Does each segment mean the trunked ports between each switch or each collision domain? -
Options
mgeorge
Member Posts: 774 ■■■□□□□□□□
onecert - use the command
show span act
enjoy
There is no place like 127.0.0.1