Options
CME CALLMANAGER COMMUNICATION
antonyice1
Member Posts: 16 ■□□□□□□□□□
HI Guys,
Yesterday I had a pblm.I was trying to make the communication between cme and callmanager 4.1.
i was able to make tha calls from callmanager registered phones to the cme registered phones.but the phones registered to cme are not able to talk to the ccm registered phones.I have reistered cme as an h323 g/w on ccm and gateway at the ccm site as an mgcp g/w.
This was the dial-peer that i wrote on cme to point to ccm .
dial-peer voice 1 voip
destination-pattern 5...
session target 10.0.0.75(ccm's ip)
Do i need any other configuration on the cme ?
Yesterday I had a pblm.I was trying to make the communication between cme and callmanager 4.1.
i was able to make tha calls from callmanager registered phones to the cme registered phones.but the phones registered to cme are not able to talk to the ccm registered phones.I have reistered cme as an h323 g/w on ccm and gateway at the ccm site as an mgcp g/w.
This was the dial-peer that i wrote on cme to point to ccm .
dial-peer voice 1 voip
destination-pattern 5...
session target 10.0.0.75(ccm's ip)
Do i need any other configuration on the cme ?
Comments
-
Options
mikej412
Member Posts: 10,086 ■■■■■■■■■■
antonyice1 wrote:I have reistered cme as an h323 g/w on ccm and gateway at the ccm site as an mgcp g/w.
Integrating Cisco Unified CallManager Express with Cisco Unified Call Manager:mike: Cisco Certifications -- Collect the Entire Set! -
Optionsantonyice1
Member Posts: 16 ■□□□□□□□□□
thank u for the link . but i was looking for any configurations that i should do and the link doenot have any configuration informations.
-
Optionsmikej412
Member Posts: 10,086 ■■■■■■■■■■
From the Cisco Unified Communications Manager Express System Administrator Guide
-- Enabling Interworking with Cisco Unified Communications Manager:mike: Cisco Certifications -- Collect the Entire Set!