Cisco 1811W - Wireless help. *SOLVED*

LOkrasaLOkrasa Member Posts: 343 ■■■□□□□□□□
I am trying to setup wireless on my 1811W router. I don't know why but everytime I try to connect to my wireless network I get an error. On my XP machine I see the SSID is up with full signal but when I try to connect I get an error that states the network is no longer in range. On my Vista machine it states that the settings do not match my wireless connection. I am pretty sure I am messing up somewhere on the config. Could someone take a look at this cfg and see my error...
Current configuration : 4438 bytes
!
version 12.4
service timestamps debug datetime msec
service timestamps log datetime msec
service password-encryption
!
hostname WirelessTest
!
boot-start-marker
boot-end-marker
!
!
no aaa new-model
clock timezone PCTime -5
clock summer-time PCTime date Apr 6 2003 2:00 Oct 26 2003 2:00
!
dot11 ssid Wireless
   vlan 1
   guest-mode
!
!
!
ip cef
no ip dhcp use vrf connected
ip dhcp excluded-address 192.168.51.1 192.168.51.50
!
ip dhcp pool 192.168.51
   network 192.168.51.0 255.255.255.0
   dns-server 192.168.63.18
   default-router 192.168.51.1
   option 150 ip 192.168.63.40
   lease 0 5
!
!
no ip dhcp-client broadcast-flag
!
multilink bundle-name authenticated
!
!
!
!
archive
 log config
!
!
!
bridge irb
!
interface FastEthernet0
 ip address dhcp
 ip nat outside
 ip virtual-reassembly
 duplex auto
 speed auto
!
interface FastEthernet1
 no ip address
 shutdown
 duplex auto
 speed auto
!
interface FastEthernet2
!
interface FastEthernet3
!
interface FastEthernet4
!
interface FastEthernet5
!
interface FastEthernet6
!
interface FastEthernet7
!
interface FastEthernet8
!
interface FastEthernet9
!
interface Dot11Radio0
 no ip address
 no ip redirects
 no ip unreachables
 no ip proxy-arp
 ip local-proxy-arp
 ip route-cache flow
 !
 encryption vlan 1 key 1 size 40bit 7 905B41516184 transmit-key
 encryption vlan 1 mode wep mandatory
 !
 ssid Wireless
 !
 speed basic-1.0 basic-2.0 basic-5.5 6.0 9.0 basic-11.0 12.0 18.0 24.0 36.0 48.0 54.0
 station-role root
!
interface Dot11Radio0.1
 encapsulation dot1Q 1 native
 no cdp enable
 bridge-group 1
 bridge-group 1 subscriber-loop-control
 bridge-group 1 spanning-disabled
 bridge-group 1 block-unknown-source
 no bridge-group 1 source-learning
 no bridge-group 1 unicast-flooding
!
interface Dot11Radio1
 no ip address
 no ip redirects
 no ip unreachables
 no ip proxy-arp
 ip local-proxy-arp
 ip route-cache flow
 !
 encryption vlan 1 key 1 size 40bit 7 FD5A59824B7D transmit-key
 encryption vlan 1 mode wep mandatory
 !
 ssid Wireless
 !
 speed basic-6.0 9.0 basic-12.0 18.0 basic-24.0 36.0 48.0 54.0
 station-role root
!
interface Dot11Radio1.1
 encapsulation dot1Q 1 native
 no cdp enable
 bridge-group 1
 bridge-group 1 subscriber-loop-control
 bridge-group 1 spanning-disabled
 bridge-group 1 block-unknown-source
 no bridge-group 1 source-learning
 no bridge-group 1 unicast-flooding
!
interface Vlan1
 no ip address
 ip nat inside
 ip virtual-reassembly
 bridge-group 1
 bridge-group 1 spanning-disabled
!
interface Async1
 no ip address
 encapsulation slip
!
interface BVI1
 description Inside$FW_INSIDE$
 ip address 192.168.51.1 255.255.255.0
 ip nat inside
 ip virtual-reassembly
 ip route-cache flow
!
router eigrp 222
 network 192.168.51.0
 network 192.168.252.0
 no auto-summary
!
!
!
ip http server
no ip http secure-server
ip nat inside source list 110 interface FastEthernet0 overload
!
access-list 110 permit ip 192.168.0.0 0.0.255.255 any
access-list 110 permit ip 10.200.0.0 0.0.255.255 any

!
!
!
!
!
!
control-plane
!
bridge 1 protocol ieee
bridge 1 route ip
!



Any help would be greatly appreciated.

Comments

  • LOkrasaLOkrasa Member Posts: 343 ■■■□□□□□□□
    Found it! I was missing the "authentication open" command under the dot11 ssid Wireless.

    Here is what the final statement should look like:
    dot11 ssid Wireless
       vlan 1
       guest-mode 
       authentication open
    

    This is 3 times now that I post my issue after troubleshooting for what seems like days and as soon as I post, I find the solution on my own! lol :D
  • NetwurkNetwurk Member Posts: 1,155 ■■■■■□□□□□
    Just set up wireless myself. My mistake was cutting and pasting the wep key from my IOS config into the wireless card's config. You think I would have known that the key "2E5B4131617E" in the "encryption vlan 2 key 1 size 40bit 7 2E5B4131617E transmit-key" line was not really the key! It was the encrypted key of course.

    Typing in the actual key worked wonders.

    :)
Sign In or Register to comment.