CCNP switching exam

I passed my CCNA a couple months ago, and I am in training to start working in NOC. This NOC supports lots of switching equipment so I thought while im working in this new position I would start working toward my first CCNP exam.

What type of equipment would be recommended for home use? Will 2900 series still cut it for CCNP?

Find more posts tagged with

Free for TechExams community: Cybersecurity salary guide

Compare cert salaries and plan your next career move

Button

Comments

networker050184

I'd go for a couple 2950s and some multilayer switches such as 3560s. I used all 3750s for my lab (very expensive if you have to buy yourself!). You could get by with out the multilayer switches, but I think its better to have hands on with all the technologies. What ever switches you get ensure they have up to date IOS that supports all the features you need.

Netstudent

Well I think you will get mixed replies to this one. The curriculum requires some kind of multilayer switch like a 3550 or 3560. You probably will not get a 3550 for less than $550 a piece. At the very least, I would say 1 3550 and 2 or 3 2950's.

Some say that you don;t really need a multilayer switch because it functionsthe same as a router. If it were me and I was completely gung ho on getting the BCMSN now, I would probably get at least 1 3550. Not only for CCNP but for future studies as well.

You will probably need some wireless devices as well. Like maybe a cisco wireless client adapter and an aironet 1200 for starters.

fonque

well im pretty strapped for cash, so i think the 3550 is out for now. Any simulators that may be able to somewhat compensate?

cisco_trooper

fonque wrote:

well im pretty strapped for cash, so i think the 3550 is out for now. Any simulators that may be able to somewhat compensate?

For simulating the 3550 you're probably limited to Boson, if it does the 3550(?? not sure). An alternative would be to hit google looking for free/cheap rack time.