Boson CCNP 7 for the BSCI exam

Hi

This question is for those who have done the BSCI exam and may be used the boson 7 ccnp lab sim.

Can you please let me know is it worth using it. It supports alot of commands but does the built in lab prepare you for the sims in the exam.

It is a good tool for learning cisco routers but the exam sims is what worries me. From ccna i have learned that they do in a different direction.

please let me know

many thanks

Find more posts tagged with

Free for TechExams community: Cybersecurity salary guide

Compare cert salaries and plan your next career move

Button

Comments

Netstudent

I don;t like it because it does not simulate multilayer switching and routing very well at all for the BCMSN exam. I like precision because the real world requires precision. If you are not precise on what the outputs are showing you, then how can you learn to be an effective troublehsooter?

Boson for NA wasn;t that bad as long as you used the built in labs and topologies, but Boson for CCNP is just horrible in my opinion. The routing protocols do not work with Multilayer switches and the outputs are way off. Maybe I got a bunk copy.

<---Does not mean my copy is unlicensed.

It may be alright for BSCI. I will not use Boson for the routing exam anyways. Home labs are too inexpensive to not invest (comparitively anyways) and Dynamips is there for the taking.

bmauro

If you're doing routing - Dynamips. Really can't beat it.

cisco_trooper

bmauro wrote:

If you're doing routing - Dynamips. Really can't beat it.

I second that notion...

general9mm

Yes, but setting that up is such a hassel. i cannot find the ios either.

cisco_trooper wrote:

bmauro wrote:

If you're doing routing - Dynamips. Really can't beat it.

I second that notion...

bmauro

I disagree with the setting up part.

All you need is to take 30 mins and read through their tutorial/walkthrough. After that - you can have a big and I mean BIG network (depending on how much RAM you have).

I have I think 10 3620 routers and one 7200 router in one of my dynamips setups and it takes I want to say less than 1GB of ram. And if I want to completely change the topology it takes me about 5-10 mins to re-config.

And talk about convenience - I can take my networking lab with me anywhere with my laptop.

But you do have a point on locating IOS...

cisco_trooper

general9mm wrote:

Yes, but setting that up is such a hassel. i cannot find the ios either.

If you are serious about learning this stuff the hour or so you'll spending learning how to use dynamips is a very small price to pay to be able to run 10 or 12 routers on your machine, considering the cost of the actual hardware. A nicely crafted google search will turn up the 12.4.18 Enterprise IOS on the first page.

mikej412

general9mm wrote:

It is a good tool for learning cisco routers but the exam sims is what worries me. From ccna i have learned that they do in a different direction.

You should be studying and practicing to learn the topics on the exam -- not just memorizing the commands for a couple of SIMs.

If you actually learn the material covered in the exam topics you should be able to pass the exam and do a job someone with a CCNP should be able to do.

If you study and practice for the SIMs (that would probably include a violation of the Cisco NDA and Candidate Conduct Policy) and while it might get you a piece of paper, you probably wouldn't be able to do the job expected of a CCNP.

Daniel333

I played with Boston and found glitches even in the labs it provides for the CCNA. I'd be scared to trust the company for anything as complicated as the CCNP. It was just tedious, and for what they charge too, it's horrible.

fonque

I highly recommend the boson sim for passing the CCNA. It will really help nail down when to use what show command.
But Daniel333 is right, it is glitchy to say the least. I do not plan on using this for anything CCNP related.

general9mm

Hi

Thanks you guy for the advise. I have spend a day setting up the GNS3 labs and finally founf some really old IOSs. But it works and i am pleased with that.

Can someone please let me know which IOS is best for preparing for BSCI.

many thanks

cisco_trooper

general9mm wrote:

Hi

Thanks you guy for the advise. I have spend a day setting up the GNS3 labs and finally founf some really old IOSs. But it works and i am pleased with that.

Can someone please let me know which IOS is best for preparing for BSCI.

many thanks

Get the latest enterprise IOS you can find...

I have 12.4(1

which I found easily on google a few weeks back: c7200-js-mz.124-18.bin

general9mm

Hi

thanks, i manage to find 7200 as well. but at 256MB of Ram it is resource hungry, kills my 2GB in no time.

any other specific 2000 or 3000 series which would take about 64MB of memory.

many thanks

networker050184

I'd suggest using Dynamips/Dynagen rather than GNS3 if you are having resource utilization issues. GNS3 tends to eat a lot more system recources in my experience. I use 3600 or 3700 routers with Dynamips usually. I also would suggest getting an IOS the leagel way rather than pirating it.

dtlokee

networker050184 wrote:

I'd suggest using Dynamips/Dynagen rather than GNS3 if you are having resource utilization issues. GNS3 tends to eat a lot more system recources in my experience. I use 3600 or 3700 routers with Dynamips usually. I also would suggest getting an IOS the leagel way rather than pirating it.

There is no "leagal" way if you are using it on Dynamips

If you have a service contract you can download it from Cisco but that is going to be for the device the service contract is tied to, not Dynamips. But this is an old arguement that will never end and I'm not trying to start a new debate. If you're using it for Dynamips who cares, right?

networker050184

True indeed dtlokee.

Netstudent

I think a lot of it has to do with the fact that dynamips is free. I think if Dynamips was something you had to buy, and the guys were profiting from it, then Cisco would probably say "hey I don't think so". Dynamips might even rake in more cash for cisco than it is pulling away because an emulator means people are studying, which means people are paying for cisco exams, which means that people are becoming cisco device advocates, which means cisco sells more hardware. So it could be seen as a silent promotional tool.