ip bandwidth-percent eigrp 1 ?

R2_2611xm(config-if)#ip bandwidth-percent eigrp 1 ?
<1-999999> Maximum bandwidth percentage that EIGRP may use

with this command if I typed 99, would that mean 99%

or would you have to put 99000?

just wondering I was a bit confused when the option wasn't 1-100

Find more posts tagged with

Free for TechExams community: Cybersecurity salary guide

Compare cert salaries and plan your next career move

Button

Comments

dtlokee

To accomidate people who lower the bandwitdth statement on the interface below the actual bandwidth. This was common on frame relay circuits.

Netstudent

aueddonline wrote:

R2_2611xm(config-if)#ip bandwidth-percent eigrp 1 ?
<1-999999> Maximum bandwidth percentage that EIGRP may use

with this command if I typed 99, would that mean 99%

or would you have to put 99000?

just wondering I was a bit confused when the option wasn't 1-100

Try this article, and maybe it will solidify it for you.

http://www.cisco.com/en/US/tech/tk365/technologies_tech_note09186a0080094063.shtml

For example:

"This configuration allows IP-EIGRP AS 210 to use 256Kbps (200% of 128Kbps) on Serial 1:

interface Serial 1
bandwidth 128
ip bandwidth-percent eigrp 210 200"

aueddonline

ok so it is the % value, god knows why you'd ask it to use 999999% of a link, cheers guys