Sims on CCENT/CCNA tests

I recently decided to pursue the CCENT/CCNA. Form one source (can’t remember where/who) I herd that during the certification simulation, you are required to type in the full command. Now I was watching the CBT nugget for CCENT and the instructor stated you can use the “?” command in the Sim. My question is, during the sim are you able to use the “Tab” key to complete commands?

Find more posts tagged with

Save $250 on 2025 certification boot camps from Infosec!

Book now with code EOY2025

Button

Comments

hypnotoad

Inline help is available on the sims.

elegua

Hi.

If you go to cisco.com in the Prep Center, you can watch a video where they tell you about the cmds you can/can't see on the exam, also if you are watching CBT CCENT video, jeremy tell something about the famous show run cmd.

About the full cmds, is not required to type the full cmd, i used shortcuts all the time and they worked for me ex; sh ip int br for show ip interface brief.

Hope this help.

127.0.0.1

The "?" and the short commands worked for me on the exam simulations. So, yes you can save time by using these shortcuts on the exam!