unix/Linx box as a router

Hey All,
has anyone ever used a linux box as a router in a business environment?
Would this be something you would recommend?

Comments

  • supertechCETmasupertechCETma Member Posts: 377
    Zebra is open source TCP/IP routing software that is similar to Cisco's Internetworking Operating System (IOS).

    http://www.ibm.com/developerworks/linux/library/l-emu/
    icon_cool.gif
    Electronic Technicians Association-International www.eta-i.org
    The Fiber Optic Association www.thefoa.org
    Home Acoustics Alliance® http://www.homeacoustics.net/
    Imaging Science Foundation http://www.imagingscience.com/
  • seuss_ssuesseuss_ssues Member Posts: 629
    I love working with linux.....but to be honest i would rather use a cisco router. I mean everyone can make their arguements one way or another about linux this and cisco that. When it comes down to it cisco is one of the largets manufacturers and pioneers in routing products in the world. If i had to have a router and i was on a shoe string budget id save a couple hundred bucks and get a 26xx off ebay. Their hardware is excellent! and their software once you are accustomed to it really isnt that difficult to setup and maintain.

    but yes, a properly setup linux box can act as a router just fine
  • blargoeblargoe Member Posts: 4,174 ■■■■■■■■■□
    I've installed a couple dozen linux boxes as firewall/router in smaller businesses over the years. You can do a lot with a PC with some extra network cards and minimal disk and memory.

    But an actual device manufactured to perform these functions is going to be better.
    IT guy since 12/00

    Recent: 11/2019 - RHCSA (RHEL 7); 2/2019 - Updated VCP to 6.5 (just a few days before VMware discontinued the re-cert policy...)
    Working on: RHCE/Ansible
    Future: Probably continued Red Hat Immersion, Possibly VCAP Design, or maybe a completely different path. Depends on job demands...
  • livenliven Member Posts: 918
    Freebsd,

    routed (routing daemon)


    3 nics (can easily use gig nics)


    ipf

    Boom,


    Very powerful router that can act as a very powerful state full firewall.

    AND you can add these features:

    SNORT,
    SQUID
    SYSLOG
    ARGUS
    OPENVPN (or IPsec tools or racoon etc...)...

    Then you have box that is an IPS, IDS, VPN, PROXY and tracks network flows. Yes it does work, and works well. Best of all it is very affordable.

    Would I do this for a MASSIVE company... probably not. Would I do this for a smaller company, sure. Actually I have done it many times.

    Worst part of it is there is some what of a learning curve. But it is not to bad....
    encrypt the encryption, never mind my brain hurts.
  • oo_snoopyoo_snoopy Member Posts: 124
    It's slow, but it works.

    Fun for advanced features in a small network.
    I used to run the internet.
  • MishraMishra Member Posts: 2,468 ■■■■□□□□□□
    I've only ever used it to do transparent firewalling in a business network.
    My blog http://www.calegp.com

    You may learn something!
  • NuwinNuwin Member Posts: 75 ■■□□□□□□□□
    We use m0n0wall at my office, but we're a pretty small company.
    "By the power of Grayskull"
  • hypnotoadhypnotoad Banned Posts: 915
    www.untangle.com -- a virtual rack linux machine where you can drop in anti-spyware, firewall, router, etc. appliances. Very cool.
Sign In or Register to comment.