X-Lite with Call Manager 6.0.1

alicicalicic Member Posts: 27 ■□□□□□□□□□
Hi,

I have installed call manger 6.0.1 on VmWare workstation and it is just working perfectly. I am trying to register X-lite SIP Softphone with it, but did not have to much luckicon_wink.gif

Had anybody managed to do so,

Please post your experience with Call Manager 6.0.1

regards
Alicic

Comments

  • LuckycharmsLuckycharms Member Posts: 267
    Can you give a little more information... any logs or anything?? I know that client has a logging function and CCM 6 is full of logs that describe the registration process... thanks...
    The quality of a book is never equated to the number of words it contains. -- And neither should be a man by the number of certifications or degree's he has earned.
  • mikej412mikej412 Member Posts: 10,086 ■■■■■■■■■■
    Can you give a little more information...
    Yeah -- more information. What were your configuration step on CallManager? What were your settings on X-Lite.

    X-Lite worked with CallManager 5.1, I haven't had time to try it with 6.x.
    :mike: Cisco Certifications -- Collect the Entire Set!
  • satriaindonesiasatriaindonesia Member Posts: 13 ■□□□□□□□□□
    hello...guys, i new member in this forum,
    I want to share for all, about setting X-lite in CallManager 6xxx.

    For setting X-lite in CallManager 6xxx no different with Setting in CallManager 5xxx
    I Give examples :

    X-lite extension : 78888

    Select Menu : User Management ->End User->Add New :
    User ID: 78888
    Password: 78888 (you can anythings)
    Confirm Password: 78888 (you can anythings)
    PIN: 78888 (you can anythings)
    Confirm PIN: 78888 (you can anythings)
    Last Name: 78888

    And You Save.

    Next Your Select Menu : Device -> Phone -> Add New
    Select Product type : Third-party SIP Device (Basic) -> Next
    MAC Address* : (your MAC PC/laptop)
    Decription: SEP(your MAC PC/laptop)
    Device Pool*:Default
    Phone Buttom Template*:Third-party SIP Device (Basic)
    Common Phone Profile : Standard Common Phone Profile(default)
    Location : Hub_None (Default)

    PROTOCOL SPECIFIC INFORMATION :
    Presence Group : Standard Presence Group (Default)
    MTP Preferred Originating Codec : 711Ulaw (gray)
    Device Security Profile : Third-party SIP Device Basic-Standard SIP non-Secure Profile
    SIP Profile : Standard SIP Profile
    Digest User : 78888

    And you Save
    "Click on the Reset Phone Button to have the Changes take Effect" --> Select OK

    In left line : "line[1]-Add a New DN"
    Directory Number* : 78888
    and you Save

    And Your Select Againt Menu : User Management -> End User
    Click in 78888 and click in "Device Association" -> Directory Number, Begin With 78888 -> Find
    and Check SEPSEP(your MAC PC/laptop) and then your click SAVE SELECTED/CHANGES

    In X-Lite Setting :
    Open Menu : Properties of Account
    User Details : 78888
    User Name : 78888
    Password : 78888
    Authorization User Name : 78888
    Domain : ip Add CM

    Domain Proxy :
    Check "Register With Domain and Receive Incoming Calls"
    Send Outbound Via :
    Check "Domain"

    Good Luck


    Best Regards

    Satria Indonesia
  • mikej412mikej412 Member Posts: 10,086 ■■■■■■■■■■
    For setting X-lite in CallManager 6xxx no different with Setting in CallManager 5xxx
    I expected as much -- thanks for the confirmation! icon_thumright.gif

    Welcome to the Forum! :D
    :mike: Cisco Certifications -- Collect the Entire Set!
  • LuckycharmsLuckycharms Member Posts: 267
    Yes, welcome...and good explanation.
    The quality of a book is never equated to the number of words it contains. -- And neither should be a man by the number of certifications or degree's he has earned.
  • alicicalicic Member Posts: 27 ■□□□□□□□□□
    Thanx for the explanation. I was close to it, thanx any how icon_wink.gif

    welcome to forum
    Alicic
  • jcrrochajcrrocha Member Posts: 1 ■□□□□□□□□□
    Hi guys, I am having problems configuring Polycom IP330 SIP phones in CallManager 6xx.

    I can configure a X-lite SIP extension in CallManager 6xx with no problem, and it works fine, but when I configure the Polycom IP330 SIP phone in CallManager I get rejected message from the status in CallManger.

    Any one can help me to get the Polycom IP330 to work in CallManager?

    Best Regards
  • sadeghisadeghi Member Posts: 2 ■□□□□□□□□□
    hi friends
    I Ran your instruction about "X-lite With Call Manager 6.0.1 "
    But I dont get desirable result
    I Get "Registration error:408-Request Timeout" from X-lite ver 3.0
    Server IP : 172.16.16.16
    Client IP : 172.16.16.20
    Connection between Client & Server have not any Problem and
    Ping Reply icon_confused.gif:icon_confused.gif:icon_confused.gif:icon_exclaim.gificon_sad.gif
Sign In or Register to comment.