Problem Radius / ISA Server

Erik45Norway · March 2008

There are no connection available to all users. you must logon before dialing

I have follow Microsoft 291 Press book.

I do not use dail-in modem, Is that the problem ??
Or are there somting I miss here ?

Thanks fore any help

Erik Gjertsen

techster79 · March 2008

Did you create any remote access policies? Grant users access under the dial-in tab of their profile? Match protocols and authentication methods on server/client? Really need more info to be able to help.

Erik45Norway · March 2008

User Propperties:
In Dail-in tab, Grant Control access through Remote Access Policy.
Session tab, End a disconnected session 30 min
active session Limmet 15 min
Idle Sesion Limmit 15 min
Member Of, VPN Group

Routing and pemote Access
Server (Local) Properties

Security: Autentication Provider, Select Radius Authentication, Configure.. Computer1 (DC)
Autentication Methods, (EAP), (MS-CHAP v2), (MS-CHAP), (CHAP)
Accounting Provider, Select Radius Authentication, Configure.. Computer1 (DC)
Allow costom IPSec policy for L2TP Connection and Password.

Computer2 Create vpn conection:
New Connection Wizard > Next > Connect to the network at my
workplace > VPN > Name > IP > next > Finch
Properties > Securities tab > IPSec Setting Use the same pasword i use above.
Networking, Select L2TP IPSec VPN.
It Work When I clik Connect.

ISA Server
Radius Client Settings, Name; Local Nas, Address: Computer1
I have verify it is correct IP Address
Client-Vendor Radius Standard And the same password.

Remote Access Policies, name: VPN, Settings, NAS- Port Type, Async (modem)
Cable, ethernet, Viritual(VPN)
I have not change on profile
Windows Groups matches "VPN" I Have not change any thing

I Think it's here there the problem is. With setting I shall use.

Thanks agan
Erik Gjertsen

Problem Radius / ISA Server

Comments