Options
Cisco Equipment for CCNA Certification
tsignal32
Member Posts: 1 ■□□□□□□□□□
in CCNA & CCENT
I Just passed my Network+ Certification. I have the following Cisco devices connected to my Home Network:
(2) Cat Switch 2912 (1) Router 2621 (1) Router 2611 (1) PIX 501 firewall
I’ve configured the switch with VLANs and interVLANs via Router on a Stick; VTP, Telnet, SSH, NAT, and PPTP(VPN).
I have not learn how to configure RIP, OSPF, EIGRP, and ACL as of yet.
Do I need any additional equipment, and did I miss anything other configuration I need to know?
tsignal32
:
(2) Cat Switch 2912 (1) Router 2621 (1) Router 2611 (1) PIX 501 firewall
I’ve configured the switch with VLANs and interVLANs via Router on a Stick; VTP, Telnet, SSH, NAT, and PPTP(VPN).
I have not learn how to configure RIP, OSPF, EIGRP, and ACL as of yet.
Do I need any additional equipment, and did I miss anything other configuration I need to know?
tsignal32
: Comments
-
Options
mikej412
Member Posts: 10,086 ■■■■■■■■■■
Check out the CCNA FAQ
You'd want at least a couple 2950 or 2960 switches. The 2912 might be okay as a 3rd or 4th switch.
You'd probably want 2 more routers -- one of which should be a supported router for running SDM (check the link in the FAQ).
You can either get a 252x to use as a frame relay switch (get an Ethernet, not Token Ring version) or an NM-4A/S to put in on of the 2600s.:mike: Cisco Certifications -- Collect the Entire Set!