What equipment is needed for these Cisco objectives? (BCMSN)

I'm looking at Cisco's information on the BCMSN exam and I've run across a couple of their objectives that I'm concerned about.

Basically, what I'd like to know is, what equipment do I need to practice on for these objectives:

-Configure and verify basic IP Phone support (i.e. Voice VLAN, Trust and CoS options, AutoQoS for voice).

AND

-Configure a wireless client (i.e., ADU).

What do you guys think? This is my current lab setup:

1x 3550 PoE
2x 2950 (SI)
1x 2511 access server router

Find more posts tagged with

Free for TechExams community: Cybersecurity salary guide

Compare cert salaries and plan your next career move

Button

Comments

gojericho0

I think that will be fine. I will be just using a router for my layer 3 switch just because of the expense. I think one of the only things you can't perform on the router that you will need to change the switch is the routing templates in order to change memory allocation to focus on routing

tomset

What about their objective "configure a wireless client"?? Do they mean configure a wireless client on a switch?

gojericho0

WLAN looks to be mostly understanding of the technology and theory. This is a little initial configuration, but it looks to be mostly done on a switch. I don't think it would cost justify purchasing any gear

tech-airman

tomset wrote:

I'm looking at Cisco's information on the BCMSN exam and I've run across a couple of their objectives that I'm concerned about.

Basically, what I'd like to know is, what equipment do I need to practice on for these objectives:

-Configure and verify basic IP Phone support (i.e. Voice VLAN, Trust and CoS options, AutoQoS for voice).

AND

-Configure a wireless client (i.e., ADU).

What do you guys think? This is my current lab setup:

1x 3550 PoE
2x 2950 (SI)
1x 2511 access server router

tomset,

Do you have a laptop with a PCMCIA slot?

tomset

tech-airman wrote:

tomset wrote:

I'm looking at Cisco's information on the BCMSN exam and I've run across a couple of their objectives that I'm concerned about.

Basically, what I'd like to know is, what equipment do I need to practice on for these objectives:

-Configure and verify basic IP Phone support (i.e. Voice VLAN, Trust and CoS options, AutoQoS for voice).

AND

-Configure a wireless client (i.e., ADU).

What do you guys think? This is my current lab setup:

1x 3550 PoE
2x 2950 (SI)
1x 2511 access server router

tomset,

Do you have a laptop with a PCMCIA slot?

Yep. Why, are they going to test my ability to join a wireless network?

tech-airman

tomset wrote:

tech-airman wrote:

tomset wrote:

I'm looking at Cisco's information on the BCMSN exam and I've run across a couple of their objectives that I'm concerned about.

Basically, what I'd like to know is, what equipment do I need to practice on for these objectives:

-Configure and verify basic IP Phone support (i.e. Voice VLAN, Trust and CoS options, AutoQoS for voice).

AND

-Configure a wireless client (i.e., ADU).

What do you guys think? This is my current lab setup:

1x 3550 PoE
2x 2950 (SI)
1x 2511 access server router

tomset,

Do you have a laptop with a PCMCIA slot?

Yep. Why, are they going to test my ability to join a wireless network?

tomset,

I am not currently studying for the 642-812 BCMSN exam, however I recently completed the "Fundamentals of Wireless LANs" course through my local Cisco Networking Academy. Based on my experience, when they mention "configure a wireless client" they may be talking about:

Configure the wireless client to create an ad hoc wireless network.
Configure the wireless client to associate with an autonomous access point (I used the Cisco 1200 series access points in the "Fundamentals of Wireless LANs" course).
Configure the wireless client to associate with a lightweight access point. (this would require a WLAN controller and lightweight access points, which wasn't part of my "Fundamentals of Wireless LANs" course).
Configure the wireless client security features such as WEP, WPA, EAP, etc.

I hope this helps.

scheistermeister

When they are talking about configuring a client they mean using the GUI program that comes with Cisco client adapters. It is the same client that Atheros uses on the WinXP version of the eeePC.

Aironet Desktop Utility

tomset

scheistermeister wrote:

When they are talking about configuring a client they mean using the GUI program that comes with Cisco client adapters. It is the same client that Atheros uses on the WinXP version of the eeePC.

Aironet Desktop Utility

Gotcha. Thanks for the info!