Options
Problem with Cisco 2511
Hello All,
I recently purchased Cisco 2511 router.The problem is it does not show 2 Async line. I have upgraded IOS assuming it could be IOS issue.
There's no config yet done. Kindly guide me if I've missed any point
Below is the o/p before and after the upgrade.
Before:
Cisco Internetwork Operating System Software
IOS ™ 2500 Software (C2500-J-L), Version 11.2(7a), RELEASE SOFTWARE (fc1)
Copyright © 1986-1997 by cisco Systems, Inc.
Compiled Tue 01-Jul-97 15:31 by kuong
Image text-base: 0x0303E1EC, data-base: 0x00001000
ROM: System Bootstrap, Version 11.0(10c), SOFTWARE
BOOTFLASH: 3000 Bootstrap Software (IGS-BOOT-R), Version 11.0(10c), RELEASE SOFTWARE (fc1)
Router uptime is 41 minutes
System restarted by reload
System image file is "flash:c2500-j-l.112-7a", booted via flash
cisco 2511 (68030) processor (revision L) with 14336K/2048K bytes of memory.
Processor board ID 05918996, with hardware revision 00000000
Bridging software.
SuperLAT software copyright 1990 by Meridian Technology Corp).
X.25 software, Version 2.0, NET2, BFE and GOSIP compliant.
TN3270 Emulation software.
1 Ethernet/IEEE 802.3 interface(s)
2 Serial network interface(s)
32K bytes of non-volatile configuration memory.
8192K bytes of processor board System flash (Read ONLY)
Configuration register is 0x2102
After Upgrade:
Term-Serv#sh ver
Cisco Internetwork Operating System Software
IOS ™ 2500 Software (C2500-I-L), Version 12.0(17), RELEASE SOFTWARE (fc1)
Copyright © 1986-2001 by cisco Systems, Inc.
Compiled Mon 16-Apr-01 19:23 by nmasa
Image text-base: 0x0302F584, data-base: 0x00001000
ROM: System Bootstrap, Version 11.0(10c), SOFTWARE
BOOTFLASH: 3000 Bootstrap Software (IGS-BOOT-R), Version 11.0(10c), RELEASE SOFTWARE (fc1)
Term-Serv uptime is 9 minutes
System restarted by reload
System image file is "flash:c2511-i-l.120-17.bin"
cisco 2511 (68030) processor (revision L) with 14336K/2048K bytes of memory.
Processor board ID 05918996, with hardware revision 00000000
Bridging software.
X.25 software, Version 3.0.0.
1 Ethernet/IEEE 802.3 interface(s)
2 Serial network interface(s)
32K bytes of non-volatile configuration memory.
8192K bytes of processor board System flash (Read ONLY)
Term-Serv#
I recently purchased Cisco 2511 router.The problem is it does not show 2 Async line. I have upgraded IOS assuming it could be IOS issue.
There's no config yet done. Kindly guide me if I've missed any point
Below is the o/p before and after the upgrade.
Before:
Cisco Internetwork Operating System Software
IOS ™ 2500 Software (C2500-J-L), Version 11.2(7a), RELEASE SOFTWARE (fc1)
Copyright © 1986-1997 by cisco Systems, Inc.
Compiled Tue 01-Jul-97 15:31 by kuong
Image text-base: 0x0303E1EC, data-base: 0x00001000
ROM: System Bootstrap, Version 11.0(10c), SOFTWARE
BOOTFLASH: 3000 Bootstrap Software (IGS-BOOT-R), Version 11.0(10c), RELEASE SOFTWARE (fc1)
Router uptime is 41 minutes
System restarted by reload
System image file is "flash:c2500-j-l.112-7a", booted via flash
cisco 2511 (68030) processor (revision L) with 14336K/2048K bytes of memory.
Processor board ID 05918996, with hardware revision 00000000
Bridging software.
SuperLAT software copyright 1990 by Meridian Technology Corp).
X.25 software, Version 2.0, NET2, BFE and GOSIP compliant.
TN3270 Emulation software.
1 Ethernet/IEEE 802.3 interface(s)
2 Serial network interface(s)
32K bytes of non-volatile configuration memory.
8192K bytes of processor board System flash (Read ONLY)
Configuration register is 0x2102
After Upgrade:
Term-Serv#sh ver
Cisco Internetwork Operating System Software
IOS ™ 2500 Software (C2500-I-L), Version 12.0(17), RELEASE SOFTWARE (fc1)
Copyright © 1986-2001 by cisco Systems, Inc.
Compiled Mon 16-Apr-01 19:23 by nmasa
Image text-base: 0x0302F584, data-base: 0x00001000
ROM: System Bootstrap, Version 11.0(10c), SOFTWARE
BOOTFLASH: 3000 Bootstrap Software (IGS-BOOT-R), Version 11.0(10c), RELEASE SOFTWARE (fc1)
Term-Serv uptime is 9 minutes
System restarted by reload
System image file is "flash:c2511-i-l.120-17.bin"
cisco 2511 (68030) processor (revision L) with 14336K/2048K bytes of memory.
Processor board ID 05918996, with hardware revision 00000000
Bridging software.
X.25 software, Version 3.0.0.
1 Ethernet/IEEE 802.3 interface(s)
2 Serial network interface(s)
32K bytes of non-volatile configuration memory.
8192K bytes of processor board System flash (Read ONLY)
Term-Serv#
Comments
-
Options
junos4me
Member Posts: 4 ■□□□□□□□□□
Rack02_TS>sh ver
Cisco Internetwork Operating System Software
IOS (tm) 2500 Software (C2500-P-L), Experimental Version 12.0(20011017:155337) [rraszuk-New_reorg_oct17 109]
Copyright (c) 1986-2001 by cisco Systems, Inc.
Compiled Sat 20-Oct-01 04:12 by rraszuk
Image text-base: 0x03043728, data-base: 0x00001000
ROM: System Bootstrap, Version 4.14(9.1), SOFTWARE
Rack02_TS uptime is 5 weeks, 6 days, 2 hours, 50 minutes
System returned to ROM by power-on
System image file is "flash:c2500-p-l.20oct2001"
cisco 2511 (68030) processor (revision D) with 16384K/2048K bytes of memory.
Processor board ID 02079176, with hardware revision 00000000
X.25 software, Version 3.0.0.
1 Ethernet/IEEE 802.3 interface(s)
2 Serial network interface(s)
16 terminal line(s) >>>>>>>>>>>>>>>>>>>> look at here
32K bytes of non-volatile configuration memory.
16384K bytes of processor board System flash (Read ONLY)
Configuration register is 0x2102
Rack02_TS>