Options
flagged as “active” in the routing table??
mincol
Member Posts: 13 ■□□□□□□□□□
in CCNA & CCENT
may I ask why "Successor routes are flagged as “active” in the routing table" is wrong.
Thank you
Thank you
CCNA 640-802 certificated
Comments
-
Optionsjason_lunde Member Posts: 567I am not real clear on your question, but when using eigrp you want your routes to be marked as passive, meaning "No EIGRP computations are being performed for this destination." Active in this case means that "EIGRP computations are being performed for this destination," or that DUAL is being run (correct me if I am wrong guys!). Then there is the dreaded sia, or stuck in active that nobody ever wants to see. If you need a good reference follow this link...
http://www.cisco.com/en/US/docs/ios/12_0/np1/command/reference/1reigrp.html
Hope that helps. -
Optionsmincol Member Posts: 13 ■□□□□□□□□□jason_lunde wrote:I am not real clear on your question, but when using eigrp you want your routes to be marked as passive, meaning "No EIGRP computations are being performed for this destination." Active in this case means that "EIGRP computations are being performed for this destination," or that DUAL is being run (correct me if I am wrong guys!). Then there is the dreaded sia, or stuck in active that nobody ever wants to see. If you need a good reference follow this link...
http://www.cisco.com/en/US/docs/ios/12_0/np1/command/reference/1reigrp.html
Hope that helps.
First of all, I appreciate your answer
that really helps meCCNA 640-802 certificated