Help! Switch 3550.

Hi all!

Could you please help me on my switch 3550-48 problem?
The switch shown below:
switch:
switch:
switch:
switch:
switch:
switch:
switch:

Used a command "flash_init" and got a message "switch: flash_init
Initializing Flash...
flashfs[0]: unable to allocate available block.
...done Initializing Flash.
Boot Sector Filesystem (bs:) installed, fsid: 3" unable to allocate available block.

I used xmodem to copy IOS image but after I click send, it's give a message " Transfer cancelled by remote system".

How could I resolve this issue and return the switch to working condition?

Your reply is very much appreciated.

Best regards

Find more posts tagged with

Free for TechExams community: Cybersecurity salary guide

Compare cert salaries and plan your next career move

Button

Comments

dtlokee

sounds like the flash may be bad or missing. When you try to transfer the image via xmodem, are you telling your terminal program to upload the file to the switch?

Turgon

It might be worth formatting the flash and trying again.

357

dtlokee wrote:

sounds like the flash may be bad or missing. When you try to transfer the image via xmodem, are you telling your terminal program to upload the file to the switch?

Hi Sir!

Yes, in windows hyperterminal under protocol.

Thank you for your reply.

Any solution please!

357

Turgon wrote:

It might be worth formatting the flash and trying again.[/quo

Hi!
Thank you for your reply.
How do I do that?

Your reply is very much appreciated.

kalebksp

You also may want to try a different console cable, I have heard of people having problems using xmodem with some console cables.

357

Hi to all!

Thank you very much for all your replies.

It's working now.

Turgon was right, reformatted the flash.

Best regards