OSPF wildmask.

Comments

• Options

  forbesl Member Posts: 454

  October 2004

  Alien wrote:

  Hi. I have been practicing OSPF but suddenly I'm a bit confused about how to calculate the following OSPF wildmask.
  
  Router NETWORK Fast e 0 serial 0 Loopback
  R_1 192.168.1.0 192.168.1.129/26 192.168.1.1/30 192.168.31.11./32
  
  R_2 192.168.1.0 192.168.0.1/24 192.168.1.2/30 192.168.31.22/32
  
  
  No matter what i try, i always end up with the following results:-
  R_1 network 192.168.1.0 0.0.0.3 area 0
  R_2 network 192.168.1.0 0.0.0.3 area 0
  network 192.168.0.0 0.0.0.255 area 0
  
  When i checked with my instructor, the answer on his manual showed a different thing. Could his manual be wrong?
  
  :

  The network/wildcard mask for your network on:
  R_1 f0 - 192.168.1.128 0.0.0.63
  R_1 s0 - 192.168.1.0 0.0.0.3
  R_1 l0 - 192.168.31.11 0.0.0.0
  
  R_2 f0 - 192.168.0.0 0.0.0.255
  R_2 s0 - 192.168.1.0 0.0.0.3
  R_2 l0 - 192.168.31.22 0.0.0.0

  0 · Share on FacebookShare on Twitter
• Options

  walid97 Member Posts: 79 ■■□□□□□□□□

  November 2004

  The easiest thing is to use the exact link address with a wildmask of 0.0.0.0:
  
  R_1 network 192.168.1.129 0.0.0.0 area 0
  R_1 network 192.168.1.1 0.0.0.0 area 0
  R_1 network 192.168.31.11 0.0.0.0 area 0
  
  R_2 network 192.168.0.1 0.0.0.0 area 0
  R_2 network 192.168.1.2 0.0.0.0 area 0
  R_2 network 192.168.31.22 0.0.0.0 area 0
  
  
  cheers!

  0 · Share on FacebookShare on Twitter