*TechNotes* EIGRP

WebmasterWebmaster Admin Posts: 10,292 Admin
Here is the first in our BSCI TechNotes series:

icon_arrow.gifEnhanced IGRP *NEW*

Let me know if you have any comments or suggestions, requests, anything...

Johan :D

Comments

  • blesablesa Member Posts: 4 ■□□□□□□□□□
    Well,

    I have a question regarding EIGRP.
    let say that we run
    R2#show ip eigrp topology

    and we get:
    ...
    P 20.20.20.0/24, 1 successors, FD is 1889792
    via 10.10.10.1 (1889792/128256), Serial 2/0.1
    ....

    What is 128256?
    Also what the code P-Passive means? A-Active?
    Thanks in advnace.

    B.A.
  • blesablesa Member Posts: 4 ■□□□□□□□□□
    Hi,

    I failed to understand when we use command

    metric weight tos K1 K2 K3 K4 K5

    what is connection with Ks and bandwidth, delay, reliability, load and MTU? Is K1= bandwith and so forth?
    Well when I look at the formula to calculate the composite metics, I am not sure which K variable should be used for MTU and for delay?
    Ok, tos is Type of Service and must be 0? Ok, but then why do we need tos in our formula when it is always 0?

    I do realise that each constant is used to assign a weight to a specific variable.

    Second question is when the folowing command will all of th erouters that the router has formed neighbours with:
    R2#show ip eigrp neighbor
    ...

    Now we have a coloumn as RTO and SRTT. What is actually SRTT and RTO?

    Thanks in advance


    Blesa
  • kemotkemot Member Posts: 2 ■□□□□□□□□□
    P means stable
    A means that DUAL is working
    (1889792/128256), (Fiseable distance/Reported distance)

    Am I Right?

    :P Tom
    blesa wrote:
    Well,

    I have a question regarding EIGRP.
    let say that we run
    R2#show ip eigrp topology

    and we get:
    ...
    P 20.20.20.0/24, 1 successors, FD is 1889792
    via 10.10.10.1 (1889792/128256), Serial 2/0.1
    ....

    What is 128256?
    Also what the code P-Passive means? A-Active?
    Thanks in advnace.

    B.A.
  • kemotkemot Member Posts: 2 ■□□□□□□□□□
    AFAIK:

    tos=0 nobody knows :)

    SRTT - Smooth Round Trip Timer
    RTO - Retransmission Time Out

    Tom
    blesa wrote:
    Hi,

    I failed to understand when we use command

    metric weight tos K1 K2 K3 K4 K5

    what is connection with Ks and bandwidth, delay, reliability, load and MTU? Is K1= bandwith and so forth?
    Well when I look at the formula to calculate the composite metics, I am not sure which K variable should be used for MTU and for delay?
    Ok, tos is Type of Service and must be 0? Ok, but then why do we need tos in our formula when it is always 0?

    I do realise that each constant is used to assign a weight to a specific variable.

    Second question is when the folowing command will all of th erouters that the router has formed neighbours with:
    R2#show ip eigrp neighbor
    ...

    Now we have a coloumn as RTO and SRTT. What is actually SRTT and RTO?

    Thanks in advance


    Blesa
  • gencoyilmazgencoyilmaz Member Posts: 4 ■□□□□□□□□□
    Webmaster wrote:
    Here is the first in our BSCI TechNotes series:

    icon_arrow.gifEnhanced IGRP *NEW*

    Let me know if you have any comments or suggestions, requests, anything...

    Johan :D

    Hi,
    in this BSCI technotes there is a section about route summarization and the command for summarization is shown as:

    router(config-if)#ip summary-address as-number network-address subnet-mask [admin-distance]

    I think there must be an "eigrp" word before as-number
    Am I right ?
    still BSCI
  • WebmasterWebmaster Admin Posts: 10,292 Admin
    Yes, you are absolutely right.

    It should indeed be
    router(config-if)#ip summary-address eigrp as-number network-address subnet-mask [admin-distance]
    

    I will correct it immediately. Thanks for spotting that one and letting me know.

    Johan
  • smashingguysmashingguy Member Posts: 4 ■□□□□□□□□□
    R2#show ip eigrp topology

    and we get:
    ...
    P 20.20.20.0/24, 1 successors, FD is 1889792
    via 10.10.10.1 (1889792/128256), Serial 2/0.1

    For the above output, I saw an explanation for the value 1889792 in (1889792/128256), but is 128256 the AD(Administrative distance). Jus wonderin if it is a composite metric. Can anyone confirm??
    CCNA,Preparin for CCNP
    Aiming to match the prowess of best of N/w Engineers
  • EdTheLadEdTheLad Member Posts: 2,111 ■■■■□□□□□□
    In the technote it says max hop counts for eigrp is 224, on cisco white papers it says 220 and in kplabs sample chapter it says 255.What is it?
    I would go with 220 myself!!
    Networking, sometimes i love it, mostly i hate it.Its all about the $$$$
  • WebmasterWebmaster Admin Posts: 10,292 Admin
    I stick to my 224. Below are some links:

    Cisco.com

    Google (Check out nr3 :D)

    Page 14 of this PDF from Cisco Press
    ed_the_lad wrote:
    on cisco white papers it says 220
    Do you have a link? I'm curious why cisco would list 220... icon_confused.gif

    255 is the maximum configurable hopcount (network diameter actually)for IGRP, by default it's 100.
  • EdTheLadEdTheLad Member Posts: 2,111 ■■■■□□□□□□
    Eigrp whitepaper http://www.cisco.com/en/US/tech/tk365/technologies_white_paper09186a0080094cb7.shtml#metrics

    Contains the following passage:

    Hop count is 2 This is not used in metric calculations, but does limit the maximum size of an EIGRP AS. The maximum number of hops that EIGRP will accept is 100 by default, although the maximum can be configured to 220 with metric maximum hops.

    Now i know its configurable to 255 but do they mean it will only allow 220 or maybe its a typo as youve seen 224 stated in a couple of places.This doc was
    last updated: Sep 09, 2005.
    Networking, sometimes i love it, mostly i hate it.Its all about the $$$$
  • cisco_troublecisco_trouble Inactive Imported Users Posts: 78 ■■□□□□□□□□
    Hi there people,

    Whats the purpose of manipulating the eigrp metrics? i assume they affect the whole network and are not locally significant?

    Thanks
    "To strive, to seek, to find, and not to yield."
  • EdTheLadEdTheLad Member Posts: 2,111 ■■■■□□□□□□
    The weights are locally significant but they must be the same as your neighbor if you want an adjacency formed.Its advisable to have the same weights everywhere in the network.
    Not recommended to change the weights unless you really need, the reason to change is to have more granularity in your routing metric.
    Networking, sometimes i love it, mostly i hate it.Its all about the $$$$
  • binabina Member Posts: 4 ■□□□□□□□□□
    hi
    your EIGRP technote is very good and useful.Will u please put more notes on other topics of CCNP like OSPF,BGP,IS-IS (from CCNP BSCI)
    and also for other CCNP modules.I'll be looking forward for more notes on CCNP
    thankx
  • Spider007Spider007 Member Posts: 6 ■□□□□□□□□□
  • Paul BozPaul Boz Member Posts: 2,620 ■■■■■■■■□□
    Thank you Johan, this guide is very concise and full of information :)
    CCNP | CCIP | CCDP | CCNA, CCDA
    CCNA Security | GSEC |GCFW | GCIH | GCIA
    pbosworth@gmail.com
    http://twitter.com/paul_bosworth
    Blog: http://www.infosiege.net/
  • LordFlasheartLordFlasheart Member Posts: 5 ■■■□□□□□□□
    Hi,

    When you run
    show ip protocols
    
    you should see the K values, by default, set to 10100. Where there is a 1 is when that element is used to calculate the metric. By default EIGRP uses bandwidth and delay so that is where the two 1's come in.

    The K values are:

    K1 = Bandwidth
    K2 = Load
    K3 = Delay
    K4 = Reliability
    K5 = MTU

    However, when you configure redistribution into EIGRP the order of the metrics is (somewhat confusingly) different. It is Bandwidth, Delay, Reliability, Load, MTU.

    HTH,

    Chris[/code]
Sign In or Register to comment.