Options
What I need for a CCNA Home Lab
![myhusky](https://us.v-cdn.net/6030959/uploads/defaultavatar/nE1RZK93BLG3K.jpg)
in CCNA & CCENT
I already have 1 Cisco 2501
1 Cisco 2514 and the cables need connect two routers
and Ethernet Recivers.
Do I need any other Cisco devices?
1 Cisco 2514 and the cables need connect two routers
and Ethernet Recivers.
Do I need any other Cisco devices?
Comments
-
Options
Webmaster Admin Posts: 10,292 Admin
Do you have a serial (DB60/v.35) cable between the two routers?
A switch would make the lab complete, although personally I don't think it is required for the CCNA exam (which mostly involves configuring routers). Nevertheless, if you can spend the money on it, get a 1900 or a 2950 for example.
Also check out this post:www.techexams.net/forums/viewtopic.php?t=3349
and our Hardware TechLab:www.techexams.net/techlabs/ccna/lab_hardware.shtml
-
Options
myhusky Member Posts: 7 ■□□□□□□□□□
someone told me I need 4 router 2 switch, that's too much for CCNA right? even too much for CCNP?
thanks -
Options
Webmaster Admin Posts: 10,292 Admin
Yeah, too much for CCNA... although... you can never have 'too much' equipment in your labBut yeah, that would be overdoing it... most of the typical CCNA labs consist of 2 2501 routers and one 1912 or 1924 switch.
Not too much for CCNP however... -
Options
myhusky Member Posts: 7 ■□□□□□□□□□
How many routers switches needed for CCNP?
How many for CCIE? -
Options
Webmaster Admin Posts: 10,292 Admin
That depends on how far you want to go. For CCNP and especially CCIE: the more the better. BUT, for these certs it is more important to get routers and switches of a particular series and with different connections and functionality. -
Options
dan87951 Member Posts: 107
If your going to do the cae studies be prepared to have more equipment than 2 routers and 1 switch. My last case study for Cisco 3 required 5 routers 4 switches. As said early you can never have to much equipment.. I personally have 2 2501's and 2 WS-C2924-XL-E switches.