Nat commands

Evening all,

just wondered if anyone has any good ways of remember the nat commands especially

ip nat inside source list NAT_ADDRESSES interface s0 overload

thanks

Find more posts tagged with

Free for TechExams community: Cybersecurity salary guide

Compare cert salaries and plan your next career move

Button

Comments

blackninja

hodgey87 wrote: »

Evening all,

just wondered if anyone has any good ways of remember the nat commands especially

ip nat inside source list NAT_ADDRESSES interface s0 overload

thanks

The way I learned, as with most of the commands, is to use them in labs over and over. They then become second nature, no easy way around it I'm afraid.

jmc012

hodgey87 wrote: »

Evening all,

just wondered if anyone has any good ways of remember the nat commands especially

ip nat inside source list NAT_ADDRESSES interface s0 overload

thanks

I've just been firing up packet tracer every night and doing the commands a few times, it just took about a week or so before I remembered those commands well. For some reason I had a mental block on that also.

bighornsheep

That command is probably the single most common NAT command/scenario even though it's quite basic. Very common for small networks with only one public IP address, such as your home network.

What the command is saying is "take all the addresses defined in the access-list NAT_ADDRESSES as inside local addresses and for the inside global address (real address) use the one currently assigned to the interface serial0, but also generate a unique source port number so that different connections from the addresses in NAT_ADDRESSES can connect using s0's address at the same time."

This is a great page explaining all of this:
Cisco IOS Network Address Translation Overview [IP Addressing Services] - Cisco Systems