ACL Issues

Hi All,

I've been hitting the books pretty hard here lately, (Odom, Lammle and Jeremy from CBT)and I was trying to test my knowledge on ACLs and NAT. It seems everything I do is wrong. I am using Packet tracer 5.1 and was wondering if anyone else has had problems testing out ACLs in it.

I have my *.pkt file saved if somone would like to look at it..I bought the Lammle Fast Pass book and I am testing out figure 7.1 on page 326. Shoot me your email, and I will send it to you.

Thanks for your help!

Find more posts tagged with

Free for TechExams community: Cybersecurity salary guide

Compare cert salaries and plan your next career move

Button

Comments

worldmac1

Here is the commands I have used. See below:

Lab_A(Config)#Access-List 10 deny 172.16.40.0 0.0.0.255
Lab_A(Config)#Access-List 10 permit any

Lab_A(Config)#int fa 0/1
Lab_A(Config-if)#ip access-group 10 out

I have attached a photo of the topology

I am still able to ping all network connections after making the ACL lists above. I'm not sure as to why all pcs can ping one another when the ACL says to deny. I guess I'm reading something wrong or the Packet Tracer program is fouled up. I have my PKT file if someone wants to check out the configuration.

acl.JPG

luke_bibby

Which interface is Lab_A's fa0/1 interface in the diagram?

If fa0/1 is in the 172.. network, then it makes sense that hosts in the 192.. and 10.. networks should be able to ping the 172.. network because the ACL is denying all traffic with a source address in with 172.16.40.0/24

Conversely, if fa0/1 is in the 10.. or 192.. networks, and ur pinging from the router to any of the PCs not in the 172.. network, then the source address will be that of the outgoing interface and NOT the interface in the 172.. network.

Hope that helped some.

tech-airman

worldmac1 wrote: »

Hi All,

I've been hitting the books pretty hard here lately, (Odom, Lammle and Jeremy from CBT)and I was trying to test my knowledge on ACLs and NAT. It seems everything I do is wrong. I am using Packet tracer 5.1 and was wondering if anyone else has had problems testing out ACLs in it.

I have my *.pkt file saved if somone would like to look at it..I bought the Lammle Fast Pass book and I am testing out figure 7.1 on page 326. Shoot me your email, and I will send it to you.

Thanks for your help!

worldmac1,

What is the goal of the ACL?

Allow everyone, except?
Block everyone, except?

mikej412

worldmac1 wrote: »

I am still able to ping all network connections after making the ACL lists above

I'm assuming that FA0/1 is that 172.16.40.254 interface....

Traffic sourced from PC Finance at 172.16.40.1 is going IN the 172.16.40.254 interface

Any traffic (and icmp echo-reply) sourced elsewhere to the 172.16.40.0 network goes OUT that 172.16.40.254 interface.

kryolla

also traffic generated by the router is not subjective to the outbound acl. Transit traffic leaving that interface sourced from network 172.16.40.x should be deny