Help with CME v7 on Cisco 1760

xrayheadxrayhead Member Posts: 14 ■□□□□□□□□□
Hi Guy's


I was hoping I could get some help with CME versions. I haven’t loaded CME for a couple of years now and the latest version I installed was cme-basic-124-3.tar

I have a 1760 with the following:
C1700 Software (C1700-IPVOICEK9-M), Version 12.4(4)XC7
System image file is "flash:c1700-ipvoicek9-mz.124-4.XC7.BIN"

Cisco 1760 (MPC860P) processor (revision 0x851) with 92136K/6168K bytes of memory.
Processor board ID FOC10455H28 (1104569380), with hardware revision 0000
MPC860P processor: part number 5, mask 2
1 FastEthernet interface
1 Serial(sync/async) interface
2 Voice FXO interfaces
2 Voice FXS interfaces
32K bytes of NVRAM.
65536K bytes of processor board System flash (Read/Write)


Now I plan to put CME version 7 onto the router if possible and I've found the following downloads on the Cisco Software Search:

Download Software for : cme-full-7.1.0.0.tar
File Description - CME 7.1 Full System Files for IOS 12.4(22)YB releases. Includes MOH,
updated GUI files, Ringtones, 7970/71/75 Backgrounds, and the following phone loads ...

Download Software for : cme-full-7.0.0.1.tar
File Description - CME 7.0 Full System Files for IOS 12.4(20)T releases. Includes MOH,
updated GUI files, BACD, Ringtones, 7970 Backgrounds, and the following phone loads ...

Download Software for : cme-basic-7.1.0.0.tar
File Description - CME 7.1 basic system files for IOS 12.4(22)YB releases, includes GUI
files and Basic Phone Loads (7906/11, 7921, 7937, 7941/61, 7942/62), Release Version ...

Download Software for : cme-basic-7.0.0.1.tar
File Description - CME 7.0 basic system files for IOS 12.4(20)T1 releases, includes
updated GUI files and Basic Phone Loads (7906/11, 7921, 7937, 7941/61), Release ...

Can someone please advise if the above versions are compatible and what you recommend I install?

Thanks in advance for any help!! :D


Xray

Comments

Sign In or Register to comment.