Any body can Help Me please ?CallManager 6x for SIP Proxy

Dear for all,
I want CallManager 6x for SIP Proxy function, how can i do this ?

Thx

Satria

Find more posts tagged with

Comments

It is already a SIP Proxy Server. You have only to configure Users and Phones in CUM 6.0 and then enter these values in SIP Phones you have

regards

satriaindonesia

I thing like that,
I have tested like this :

Case I :
SIP Phone1 --> Router 1 --> WAN ---> Router 2 ---> CallManager 6
> Router 2

> SIP-Phone2

Result tested : SIP-Phone1 to SIP-Phone2 OR SIP-Phone2 to SIP-Phone1 = Succes

Case II :
SIP-Phone1 --> Router 1 --> WAN --> Router 2 --> CallManager 6
> Router 2

> WAN ---> Router 3 --> SIP-Phone2

Result tested : SIP-Phone1 to SIP-Phone2 OR SIP-Phone2 to SIP-Phone1 = Succes

Case III :
SIP-Phone1 --> Router 1 --> WAN --> Router 2 --> CallManager 6
> Router 2 ---> WAN ---> Router 3 --> IP-PBX (SIP)

Result tested : SIP-Phone1 to IP-PBX (SIP) OR IP-PBX (SIP) to SIP-Phone1 = Succes

Case IV :
IP-PBX (SIP) --> Router 1 --> WAN ---> Router 2---> CallManager 6
> Router 2

> SIP-Phone2

Result tested : SIP-Phone2 to IP-PBX (SIP) OR IP-PBX (SIP) to SIP-Phone2 = Succes

Case V :
IP-PBX (SIP)1 --> Router 1 --> WAN --> Router 2 --> CallManager 6
> Router 2 ---> WAN ---> Router 3 --> IP-PBX (SIP)2

Result tested :
IP-PBX (SIP)1 to IP-PBX (SIP)2 OR IP-PBX (SIP)1 to IP-PBX (SIP)2 = NOT SUCCES

IF I Change CallManager 6 with BREKEKE :

Result tested :
IP-PBX (SIP)1 to IP-PBX (SIP)2 OR IP-PBX (SIP)1 to IP-PBX (SIP)2 = SUCCES(WITH BREKEKE)

WHAT THE PROBLEM of THIS CASE V ?

Best Regards

Satria Indonesia

mikej412

satriaindonesia wrote:

WHAT THE PROBLEM of THIS CASE V ?

It sounds like you've isolated the problem to the Unified Communications Manager 6 Server, since you got it to work with Brekeke. I'd probably do a sniffer trace with Brekeke first since that works. Then configure a trace on the CM 6 server and also do a sniffer trace.

I'd probably first compare the working Brekeke sniffer trace with the CM 6 sniffer trace, and if the configuration problem wasn't obvious from that, then I'd go through the CM 6 trace log file (and probably a large amount of coffee).

satriaindonesia

thanks i will try

Best Regards
Satria

satriaindonesia

hello...any one help me please ?

After i running wireshark in my CM 6, i get message like this :
Invite SIP : xxxx
100 trying
403 forbidden
ack sip:yyyy

what that problem in my system ?

best regards

Satria

mikej412

satriaindonesia wrote:

403 forbidden

Assuming that's the CM6 server responding, it received and understood the request - but said NO for some reason.

What action/device caused the INVITE and what did the CM6 trace show?

AngelReign

Enduser/Appuser Certificate Authority Proxy Function (CAPF) for computer ... With Cisco Unified Communications Manager 6.0, SIP T.38 is now supported for ... Features originally introduced with Cisco Unified CallManager 4.2 are now

_________________
IP PBX