Sdm

GrigsbyGrigsby Member Posts: 69 ■■□□□□□□□□
So I installed the client software on my PC. I don't have to install something on my Cisco Hardware for this to work do I? Just networking connectivity, specify the address...

Comments

  • jason_lundejason_lunde Member Posts: 567
    Right...you can install the SDM on the hardware, but it will run from your pc and connect to your devices as long as you have established basic connectivity to them. The device must be configured for http or http secure-server access though.
  • GrigsbyGrigsby Member Posts: 69 ■■□□□□□□□□
    Yeah that's what I was thinking. I am actually using Dynamips. I have telnet connectivity to the device, which works. Trying to run my security audit, and it just kind of hangs. I ran wireshark on my loopback adapter in Vista, and it doesn't send it squat. I dunno, I need to play with it some more.
  • GrigsbyGrigsby Member Posts: 69 ■■□□□□□□□□
    Just to make sure, I did check the feature set and it did say it supported SDM. Image c3640-jk9s-mz.124-16.bin
  • mikearamamikearama Member Posts: 749
    Just a thought...

    124-16 might support SDM, but it isn't the SDM image. On the PIX/ASA's, you ftp up the image.bin and the asdm.bin files. Same with ISR's... download both IOS and SDM software.

    The client side software has to connect to the SDM software in flash.
    There are only 10 kinds of people... those who understand binary, and those that don't.

    CCIE Studies: Written passed: Jan 21/12 Lab Prep: Hours reading: 385. Hours labbing: 110

    Taking a time-out to add the CCVP. Capitalizing on a current IPT pilot project.
  • tierstentiersten Member Posts: 4,505
    mikearama wrote: »
    The client side software has to connect to the SDM software in flash.
    You can install it locally on your PC. It doesn't need anything stored in the router.

    Putting SDM onto the router just means you don't have to install it on your PC.
Sign In or Register to comment.