I got a new router from work (2521)
drew2000
Member Posts: 290
in CCNA & CCENT
Does anyone know if this will be useful? I saved it from the trash.
It has 10 serial ports (some are A/S), one AUI port, and one 10bt ethernet port.
I think it might be useful as a frame relay switch, but I have not been able to research it yet.
I think it is kind of an oddball in that is has 10 serial ports.
Andrew
It has 10 serial ports (some are A/S), one AUI port, and one 10bt ethernet port.
I think it might be useful as a frame relay switch, but I have not been able to research it yet.
I think it is kind of an oddball in that is has 10 serial ports.
Andrew
Comments
-
tiersten Member Posts: 4,505You sure it isn't a 2522? A 2521 doesn't have 10 serial ports.
As you correctly guessed, it will be useful as a frame relay switch. -
drew2000 Member Posts: 290You got it - it is a 2522.
I'll have to boot it up and get to work this weekend...
Thanks!
Drew -
drew2000 Member Posts: 290Looks like it has an ISDN interface too.
Here is what the ver is: (IOS is a bit old but will probably work)
Router>show ver
Cisco Internetwork Operating System Software
IOS (tm) 2500 Software (C2500-JK8S-L), Version 12.2(1d), RELEASE SOFTWARE (fc1)
Copyright (c) 1986-2002 by cisco Systems, Inc.
Compiled Sun 03-Feb-02 18:14 by srani
Image text-base: 0x0307C2FC, data-base: 0x00001000
ROM: System Bootstrap, Version 11.0(10c), SOFTWARE
BOOTFLASH: 3000 Bootstrap Software (IGS-BOOT-R), Version 11.0(10c), RELEASE SOFT
WARE (fc1)
Router uptime is 3 minutes
System returned to ROM by power-on
System image file is "flash:/c2500-jk8s-l.122-1d.bin"
cisco 2522 (68030) processor (revision N) with 14336K/2048K bytes of memory.
Processor board ID 15826327, with hardware revision 00000003
Bridging software.
X.25 software, Version 3.0.0.
SuperLAT software (copyright 1990 by Meridian Technology Corp).
TN3270 Emulation software.
Basic Rate ISDN software, Version 1.1.
1 Ethernet/IEEE 802.3 interface(s)
2 Serial network interface(s)
8 Low-speed serial(sync/async) network interface(s)
1 ISDN Basic Rate interface(s)
32K bytes of non-volatile configuration memory.
16384K bytes of processor board System flash (Read ONLY)
Configuration register is 0x2102 -
captobvious Member Posts: 648Here is what the ver is: (IOS is a bit old but will probably work)
-
mens Member Posts: 69 ■■■□□□□□□□yea congratz, I bought my 2522 for like 100 bucks and like you said yourself it's great for FR
-
drew2000 Member Posts: 290Thanks guys, it missed the trash pile by about 1 hour. I had to have a buddy save it for me.
Do you see anything particularly special besides the 8 serial ports? I can see using it for frame relay, but if there is anything else special that I should use it for please let me know!
I haven't had the chance to get to know this router really well yet, since I just got it today.
Thanks,
Drew -
tiersten Member Posts: 4,505The special part is that its got lots of serial ports and will work well as a frame relay switch
-
drew2000 Member Posts: 290Sweet - just wanted to make sure I didn't miss anything else!
Good thing I need to study Frame Relay this weekend some more....
Drew -
nutech444 Member Posts: 50 ■■□□□□□□□□you can use this config, just change the dlci numbers to your liking, at least thats what I did.
Frame Relay Switch Configuration For Cisco Lab