Options
Cisco Switch Question (Repost)
Daniel333
Member Posts: 2,077 ■■■■■■□□□□
in CCNA & CCENT
Sorry about the repost, but I thought it might do better to ask under the Cisco certification board...
For budget reasons we are looking at a non-catalyst POE switches for a very small office. Ideally we will be running through their phones down to the workstation... on a catalyst I would do something like this.
Switch(config-if)#switchport voice vlan XYZ
Does anyone know if the WebView switches support this or do I have to use a seperate port? Such as Cisco SRW224G4P?
For budget reasons we are looking at a non-catalyst POE switches for a very small office. Ideally we will be running through their phones down to the workstation... on a catalyst I would do something like this.
Switch(config-if)#switchport voice vlan XYZ
Does anyone know if the WebView switches support this or do I have to use a seperate port? Such as Cisco SRW224G4P?
-Daniel
Comments
-
Optionsnetworker050184 Mod Posts: 11,962 ModI have been working with some of the Linksys business class PoE switches for a new VoIP product we are testing. On those switches you can set the port to trunk with the proper VLANs to work with a phone and pc attached. I'd assume that the model you have referred to would be similar.
I found this data sheet on your particular switch.An expert is a man who has made all the mistakes which can be made. -
OptionsRTmarc Member Posts: 1,082 ■■■□□□□□□□Take a look at the AdTran PoE switches. I used them in several areas when a Cisco budget just wasn't there.