Who discover who first? host or network?
Handbrake
Member Posts: 40 ■■□□□□□□□□
in CCNA & CCENT
Let's say I purchased a brand new router or switch
then i proceed to connect a pc to it.
Who send out a signal first?
then i proceed to connect a pc to it.
Who send out a signal first?
Comments
-
tech-airman Member Posts: 953Let's say I purchased a brand new router or switch
then i proceed to connect a pc to it.
Who send out a signal first?
Handbrake,
Did you plug the router or switch into the wall outlet yet? -
Handbrake Member Posts: 40 ■■□□□□□□□□tech-airman wrote: »Handbrake,
Did you plug the router or switch into the wall outlet yet?
Of course -
Handbrake Member Posts: 40 ■■□□□□□□□□tech-airman wrote: »Handbrake,
How did you connect the PC to the networking device?
PC<---cat5---->Router -
Handbrake Member Posts: 40 ■■□□□□□□□□cat5e straight through cable
pin1 = tx+
pin2 = tx-
pin3 = rx+
pin6 = rx- -
tech-airman Member Posts: 953cat5e straight through cable
pin1 = tx+
pin2 = tx-
pin3 = rx+
pin6 = rx-
Handbrake,
Which physical port of the router did you plug the "cat5e straight through cable" into? -
Handbrake Member Posts: 40 ■■□□□□□□□□Console port?
Don't console port required roll over cable?
responding to tech-airman
ethernet1 -
mikej412 Member Posts: 10,086 ■■■■■■■■■■For a router, has the interface been configured and the no shut command executed on the interface?:mike: Cisco Certifications -- Collect the Entire Set!
-
Handbrake Member Posts: 40 ■■□□□□□□□□For a router, has the interface been configured and the no shut command executed on the interface?
No..i don't have a router to practice on for real...I was just saying
Let's say if i've purchased.. sorry if u guys miss understood
Originally, I just want to know ARP..now i get it, host broadcast ARP FF.FF.FF.FF.FF.FF
I have GNS3 software setup with IOS c2600 to work with except i'm having problem of my CPU max out at 100%..
My PC is
WinXP Pro
2.8ghz core2duo
2GB ram
14GB C: drive free space -
tech-airman Member Posts: 953Don't console port required roll over cable?
responding to tech-airman
ethernet1
Handbrake,
What speed does the NIC in the computer operate at? -
Handbrake Member Posts: 40 ■■□□□□□□□□tech-airman wrote: »Handbrake,
What speed does the NIC in the computer operate at?
It's a Gigabit NIC onboard -
Bl8ckr0uter Inactive Imported Users Posts: 5,031 ■■■■■■■■□□No..i don't have a router to practice on for real...I was just saying
Let's say if i've purchased.. sorry if u guys miss understood
Originally, I just want to know ARP..now i get it, host broadcast ARP FF.FF.FF.FF.FF.FF
I have GNS3 software setup with IOS c2600 to work with except i'm having problem of my CPU max out at 100%..
My PC is
WinXP Pro
2.8ghz core2duo
2GB ram
14GB C: drive free spaceYou need to calculate your idlepc values.
Agreed. I had the exact same issue. Also how many routers are you running? You may need to up the ram in your machine at some point to get more routers running in gns3. -
dynamik Banned Posts: 12,312 ■■■■■■■■■□Or ditch GNS3. Seriously, it's a breeze to configure the net files. If you can't handle that, you shouldn't be working with Cisco
Check out the ghostios and sparsemem settings as well.