find memory cisco device

I know how to use show mem and show flash

but is there a way to find:

nvram
flash
ram

? all in one command.

show memory show the ram right?
of course show flash shows flash

show what is nvram size?

to summarize and please correct me if I am wrong

Nvram is for startup config storage
ram is for both IOS and startup config to run in
flash holds files such as the image .bin and other files

I just would like a command that shows them all
thanks
I dont know of any that show nvram size?

Find more posts tagged with

Free for TechExams community: Cybersecurity salary guide

Compare cert salaries and plan your next career move

Button

Comments

Forsaken_GA

itdaddy wrote: »

I dont know of any that show nvram size?

Should probably take a closer look at show ver

Cisco 2611XM (MPC860P) processor (revision 3.0) with 127308K/3764K bytes of memory.
Processor board ID JAE0818FEFT
M860 processor: part number 5, mask 2
2 FastEthernet interfaces
32K bytes of NVRAM.
49152K bytes of processor board System flash (Read/Write)

Of course what show ver shows can be different from platform to platform

Cisco WS-C3550-48 (PowerPC) processor (revision Q0) with 65526K/8192K bytes of memory.
Processor board ID CAT0845Y124
Last reset from warm-reset
Running Layer2/3 Switching Image

The password-recovery mechanism is enabled.
384K bytes of flash-simulated NVRAM.

If you're trying to view the actual contents of nvram, use dir nvram: and more nvram:

mikej412

Here's the info from a 2950 switch.....

show version

S2950-2#show version
Cisco Internetwork Operating System Software
IOS (tm) C2950 Software (C2950-I6Q4L2-M), Version 12.1(22)EA4, RELEASE SOFTWARE
......

32K bytes of flash-simulated non-volatile configuration memory.

......

S2950-2#

and for the contents:

S2950-2#dir ?
  /all             List all files
  /recursive       List files recursively
  all-filesystems  List files on all filesystems
  bs:              Directory or file name
  cns:             Directory or file name
  flash:           Directory or file name
  null:            Directory or file name
  nvram:           Directory or file name
  system:          Directory or file name
  xmodem:          Directory or file name
  ymodem:          Directory or file name
  <cr>

S2950-2#dir all-filesystems
Directory of flash:/

    2  -rwx         109  Feb 28 1993 18:01:46 -06:00  info
    3  -rwx         269  Dec 31 1969 18:01:47 -06:00  env_vars
    4  -rwx         976  Mar 26 1993 15:39:31 -06:00  vlan.dat
    5  -rwx        4937  Feb 28 1993 18:09:33 -06:00  config.old
    7  -rwx     3097872  Feb 28 1993 18:03:16 -06:00  c2950-i6q4l2-mz.121-22.EA4.bin
    8  drwx        4032  Feb 28 1993 18:03:45 -06:00  html
  362  -rwx         109  Feb 28 1993 18:04:16 -06:00  info.ver
  363  -rwx          25  Feb 28 1993 18:23:24 -06:00  private-config.text
  364  -rwx        1048  Feb 28 1993 18:23:24 -06:00  multiple-fs
  365  -rwx        2947  Feb 28 1993 18:23:24 -06:00  config.text

7741440 bytes total (3070464 bytes free)
Directory of nvram:/

   28  -rw-        2947                    <no date>  startup-config
   29  ----          25                    <no date>  private-config
    1  -rw-           0                    <no date>  ifIndex-table

32768 bytes total (28720 bytes free)
Directory of system:/

    2  dr-x           0                    <no date>  memory
    1  -rw-        3715                    <no date>  running-config

No space information available
S2950-2#

Forsaken_GA

Huh, you know, it never actually occurred to me to do ? on the dir command to see what my other options were. Thanks mike!

itdaddy

thanks; I did a reload on my ap1200 and it showed all that too likeyou guys said...i thought there might be a show all memory types command ahha aahahah

thank...I do need to look closer it is in ther witha ll that writing my Ap1200 puts out on reload but a show version doesn show much.weird but thanks guys doing an inventory of all my 20 devices so I can upgrad some if needed thanks

appreciate your help

itdaddy

cisco 2511 (68030) processor (revision D) with 8192K/2048K bytes of memory

this means RAM right? how do you read exact ram size?

confused on this what does the ratio mean?

AlanJames

show processes memory to see what process is using the most memory

captobvious

itdaddy wrote: »

cisco 2511 (68030) processor (revision D) with 8192K/2048K bytes of memory

this means RAM right? how do you read exact ram size?

confused on this what does the ratio mean?

8192K = processor memory
2048K = i/o memory

Default is 75%/25%

itdaddy

captobvious and AlanJames

thanks guys just read all the posts and thanks I got it

bad eyes.