Options
WAN Cabling question
DerekAustin26
Member Posts: 275
in CCNA & CCENT
I have read all about the LAN topologies & cabling etc..
Now last night I read in my CCENT book about Fundamentals of WANS. And all it showed was Serial cables... IS that all WANS use for cabling is Serial Cables?
It didnt say one thing about Fiber Optics or anything else. (I guess fiber optics is for LANS, CANS (Campus Area Networks) & MANS (Metro Area Networks)
Now last night I read in my CCENT book about Fundamentals of WANS. And all it showed was Serial cables... IS that all WANS use for cabling is Serial Cables?
It didnt say one thing about Fiber Optics or anything else. (I guess fiber optics is for LANS, CANS (Campus Area Networks) & MANS (Metro Area Networks)
Comments
-
Optionsmikem2te Member Posts: 407DerekAustin26 wrote: »I have read all about the LAN topologies & cabling etc..
Now last night I read in my CCENT book about Fundamentals of WANS. And all it showed was Serial cables... IS that all WANS use for cabling is Serial Cables?
It didnt say one thing about Fiber Optics or anything else. (I guess fiber optics is for LANS, CANS (Campus Area Networks) & MANS (Metro Area Networks)
Other technologies are now probably more common or will be soon such as VPNs over the internet, MPLS etc. In my last place of work we had a microwave wireless link between two sites - don't now how it worked, the service provider just installed an ethernet jack in both buildings.Blog : http://www.caerffili.co.uk/
Previous : Passed Configuring Microsoft Office SharePoint Server 2007 (70-630)
Currently : EIGRP & OSPF
Next : CCNP Route -
Optionsjohnwest43 Member Posts: 294Thats the old school way when you had a separate CSU. Most T-1's today have an integrated CSU so the preferred cabling is cat5.CCNP: ROUTE B][COLOR=#ff0000]x[/COLOR][/B , SWITCH B][COLOR=#ff0000]x[/COLOR][/B, TSHOOT [X ] Completed on 2/18/2014
-
Optionsmikem2te Member Posts: 407johnwest43 wrote: »Thats the old school way when you had a separate CSU. Most T-1's today have an integrated CSU so the preferred cabling is cat5.
I know some providers get a bit grumpy if you remove their CSU, some consider the demarc to be the customer side of the CSU, if you take the CSU out and plug the cable directly into the router there can be issues with support from the provider if the connection has problems.Blog : http://www.caerffili.co.uk/
Previous : Passed Configuring Microsoft Office SharePoint Server 2007 (70-630)
Currently : EIGRP & OSPF
Next : CCNP Route -
Optionsnotgoing2fail Member Posts: 1,138This goes back to a post I made recently on another site about the technical definition of a WAN connection.
Your linksys has a WAN port. But one can argue if it's really a true WAN port because it's just an ethernet port that connects to your ISP's modem. I think times are changing now on what the technical definition of WAN port is.... -
Optionshermeszdata Member Posts: 225notgoing2fail wrote: »This goes back to a post I made recently on another site about the technical definition of a WAN connection.
Your linksys has a WAN port. But one can argue if it's really a true WAN port because it's just an ethernet port that connects to your ISP's modem. I think times are changing now on what the technical definition of WAN port is....
Regardless of the type of connection, if that connection is to a wider area than your home, office, branch office, it is a WAN!
However, for CCNA scope, it is limited to serial types of connections.JohnCurrent Progress:
Studying:CCNA Security - 60%, CCNA Wireless - 80%, ROUTE - 10% (Way behind due to major Wireless Project)Exams Passed:
CCNA - 640-802 - 17 Jan 2011 -- CVOICE v6 - 642-436 - 28 Feb 2011
2011 Goals
CCNP/CCNP:Voice -
Optionsnotgoing2fail Member Posts: 1,138hermeszdata wrote: »Regardless of the type of connection, it that connection is to a wider area than your home, office, branch office, it is a WAN!
However, for CCNA scope, it is limited to serial types of connections.
Agreed. One shouldn't get too deep into this concept. It's just an idea I was tossing around on another site. For the scope of the CCNA, keep it with serial... -
Optionsrage_hog Banned Posts: 42 ■■□□□□□□□□Serial is a tx/rx method not a cable. A Cisco serial link just means a dedicated line between router A and router B. If there were more than one signal on a WAN link it would involve frequency multiplexing such as a satillite or microwave link. That is a whole different class of router. I have seen sat routers that have liquid coolled CPU's running at 24 Ghz
-
Optionsnotgoing2fail Member Posts: 1,138I have seen sat routers that have liquid coolled CPU's running at 24 Ghz
I WANT TO SEE ONE OF THOSE!!! -
Optionsgecco Member Posts: 18 ■□□□□□□□□□Derek,
When referring to what used to be "traditional" WAN...serial cables were all that was available, as we connected routers serial ports..aka "s0" "s0/0" etc, to a device that would terminated a serial line such as a T1 or DDS line. This is physical layer only, and used be synonymous with WAN.
Now, in real life, the definition of WAN has broadened widely (no pun intended) with the use of Metro Ethernet, broadband, satellite, MPLS, and traditional site-to-site VPNs.
So, from a CCNA perspective, when a WAN cable is referred to, it is typically talking about a serial cable, such as DB60 to something cable (DB60 is the serial interface on most Cisco routers), even though in practice today's "WAN" cable can be a CAT5/6, Fiber Cable, or other.
I hope this helps!