PT5 and VLAN

Hi Guys,
I have a problem when I configure port as an access port.
First , this is my network

When I configure any port to any VLAN it dose not work !!
But when I'm not change these port (all port stay in native VLAN or VLAN 1)it work !

And When I replce the switch to 3650 as shown below

All think change !
When I don't assign any port to VLAN , its not work and vice versa !
I really dont understand whats happen !!
Please advise,

Find more posts tagged with

Free for TechExams community: Cybersecurity salary guide

Compare cert salaries and plan your next career move

Button

Comments

fieldmonkey

sniper_here wrote: »

Hi Guys,

When I configure any port to any VLAN it dose not work !!

what commands did you use to configure the VLAN AND associate the port with the VLANs?

sniper_here

fieldmonkey wrote: »

what commands did you use to configure the VLAN AND associate the port with the VLANs?

I used >>
switchport access vlan (number of vlan)

fieldmonkey

if you do a show vlan brief command do you see VLAN IDs for the VLANs and are they associated with those particular ports you believe they are suppose to be associated with?

Also verify your are trunking on each switch.

mikej412

Can you ping between PCs that are configured in the same VLANs?

Did you do the command(s) to verify the trunks between the switches the switches are working?

Do you have that router set up for Router-on-a-Stick so that you can ping between PCs in different VLANs?

And a popular error: Do you have the correct default gateway IP address configured on each PC?

sniper_here

mikej412 wrote: »

Can you ping between PCs that are configured in the same VLANs?

Did you do the command(s) to verify the trunks between the switches the switches are working?

Do you have that router set up for Router-on-a-Stick so that you can ping between PCs in different VLANs?

And a popular error: Do you have the correct default gateway IP address configured on each PC?

I Solve the Problem

YEEEEEH

I have alot of misconfigure in my network !!

By the way , the default geteway is part of problem

Thank you very much