Options
PT5 and VLAN
sniper_here
Member Posts: 48 ■■□□□□□□□□
in CCNA & CCENT
Hi Guys,
I have a problem when I configure port as an access port.
First , this is my network
When I configure any port to any VLAN it dose not work !!
But when I'm not change these port (all port stay in native VLAN or VLAN 1)it work !
And When I replce the switch to 3650 as shown below
All think change !
When I don't assign any port to VLAN , its not work and vice versa !
I really dont understand whats happen !!
Please advise,
I have a problem when I configure port as an access port.
First , this is my network
When I configure any port to any VLAN it dose not work !!
But when I'm not change these port (all port stay in native VLAN or VLAN 1)it work !
And When I replce the switch to 3650 as shown below
All think change !
When I don't assign any port to VLAN , its not work and vice versa !
I really dont understand whats happen !!
Please advise,
Comments
-
Options
fieldmonkey
Users Awaiting Email Confirmation Posts: 254 ■■■□□□□□□□
sniper_here wrote: »
what commands did you use to configure the VLAN AND associate the port with the VLANs?WIP:
Husband & Fatherhood Caitlin Grace born 8-26-2010
Future Certs:
Q1-2011 - INCD2, Microsoft or Linux (decisions, decisions...) -
Optionssniper_here
Member Posts: 48 ■■□□□□□□□□
fieldmonkey wrote: »what commands did you use to configure the VLAN AND associate the port with the VLANs?
I used >>
switchport access vlan (number of vlan) -
Optionsfieldmonkey
Users Awaiting Email Confirmation Posts: 254 ■■■□□□□□□□
if you do a show vlan brief command do you see VLAN IDs for the VLANs and are they associated with those particular ports you believe they are suppose to be associated with?
Also verify your are trunking on each switch.WIP:
Husband & Fatherhood Caitlin Grace born 8-26-2010
Future Certs:
Q1-2011 - INCD2, Microsoft or Linux (decisions, decisions...) -
Options
mikej412
Member Posts: 10,086 ■■■■■■■■■■
Can you ping between PCs that are configured in the same VLANs?
Did you do the command(s) to verify the trunks between the switches the switches are working?
Do you have that router set up for Router-on-a-Stick so that you can ping between PCs in different VLANs?
And a popular error: Do you have the correct default gateway IP address configured on each PC?:mike: Cisco Certifications -- Collect the Entire Set! -
Optionssniper_here
Member Posts: 48 ■■□□□□□□□□
Can you ping between PCs that are configured in the same VLANs?
Did you do the command(s) to verify the trunks between the switches the switches are working?
Do you have that router set up for Router-on-a-Stick so that you can ping between PCs in different VLANs?
And a popular error: Do you have the correct default gateway IP address configured on each PC?
I Solve the Problem
YEEEEEH
I have alot of misconfigure in my network !!
By the way , the default geteway is part of problem
Thank you very much