Options

redundant RR IBGP session in IBGP

dwater2010dwater2010 Member Posts: 33 ■■□□□□□□□□
in Juniper
In case of redundant RR, how the IBGP session will be build between RR: under cluster configuration or under IBGP group configuration? Both RR is part of same cluster. In any way the clients will have IBGP session to both RR and RR will ignore the routes received from each other because of cluster-id.
· Share on FacebookShare on Twitter

Comments

  • Options
    ccie15672ccie15672 Member Posts: 92 ■■■□□□□□□□
    ibgp group configuration
    Derick Winkworth
    CCIE #15672 (R&S, SP), JNCIE-M #721
    Chasing: CCIE Sec, CCSA (Checkpoint)
    · Share on FacebookShare on Twitter
  • Options
    hoogen82hoogen82 Member Posts: 272
    You could create ibgp sessions from rr-clients to rr in the cluster group... and then create a separate ibgp group just for the RR's
    IS-IS Sleeps.
    BGP peers are quiet.
    Something must be wrong.
    · Share on FacebookShare on Twitter
  • Options
    dwater2010dwater2010 Member Posts: 33 ■■□□□□□□□□
    so it will be separate: One IBGP group for Clients and one more IBGP group to have IBGP session with redundant RRs of same cluster.

    So that way client will have only one IBGP group configured on it and RR will have two IBGP group configured on them.
    · Share on FacebookShare on Twitter
  • Options
    hoogen82hoogen82 Member Posts: 272
    Yep that would be okay..
    IS-IS Sleeps.
    BGP peers are quiet.
    Something must be wrong.
    · Share on FacebookShare on Twitter
Sign In or Register to comment.