project

yashica

suggest me good project for my presentation in ccna

Find more posts tagged with

Free for TechExams community: Cybersecurity salary guide

Compare cert salaries and plan your next career move

Button

Comments

fly351

10 router partial mesh frame relay. Half running OSPF, redistribute the other half into EIGRP. Each router should have an attached LAN with 3 layer 2 switches running RPVST+ and different VLANs. Implement NAT at each router and verify that NAT is actually translating across the Frame connections. Each LAN should have its own DHCP server and you should apply ACLs at each segment to block traffic to the DHCP server from outside traffic.

That's my suggestion

jamesleecoleman

fly351 wrote: »

10 router partial mesh frame relay. Half running OSPF, redistribute the other half into EIGRP. Each router should have an attached LAN with 3 layer 2 switches running RPVST+ and different VLANs. Implement NAT at each router and verify that NAT is actually translating across the Frame connections. Each LAN should have its own DHCP server and you should apply ACLs at each segment to block traffic to the DHCP server from outside traffic.

That's my suggestion

Sounds fun

mikej412

yashica wrote: »

suggest me good project for my presentation in ccna

Can you be more specific?

Do you have to get up in front of your class and give a talk about a CCNA topic? How long? Do you have to demonstrate or teach anything in your presentation?

Or do you have to talk about a CCNA Network solution and configuration.

If it's a school or class thing, then one of the Implement topics from the exam blueprint is probably a good choice since you can talk or demonstrate or show a completed configuration depending on the requirements. Implement basic switch security is always a fun topic.

If the presentation is more involved than that and you're supposed to show off ALL your CCNA knowledge, then something like fly351 suggested makes sense.

Either way, the exam blueprint should be your guide. You just need to define the scope.

chmorin

fly351 wrote: »

10 router partial mesh frame relay. Half running OSPF, redistribute the other half into EIGRP. Each router should have an attached LAN with 3 layer 2 switches running RPVST+ and different VLANs. Implement NAT at each router and verify that NAT is actually translating across the Frame connections. Each LAN should have its own DHCP server and you should apply ACLs at each segment to block traffic to the DHCP server from outside traffic.

That's my suggestion

Ah, the exploding Cisco volcano project. Classic.

pitviper

fly351 wrote: »

10 router partial mesh frame relay. Half running OSPF, redistribute the other half into EIGRP. Each router should have an attached LAN with 3 layer 2 switches running RPVST+ and different VLANs. Implement NAT at each router and verify that NAT is actually translating across the Frame connections. Each LAN should have its own DHCP server and you should apply ACLs at each segment to block traffic to the DHCP server from outside traffic.

That's my suggestion

Perfect! Just need to mix in a little IPv6

gouki2005

fly351 wrote: »

10 router partial mesh frame relay. Half running OSPF, redistribute the other half into EIGRP. Each router should have an attached LAN with 3 layer 2 switches running RPVST+ and different VLANs. Implement NAT at each router and verify that NAT is actually translating across the Frame connections. Each LAN should have its own DHCP server and you should apply ACLs at each segment to block traffic to the DHCP server from outside traffic.

That's my suggestion

remind me to my ccna 4 case study

yashica

thanks to all for their suggestions..
i have to choose one topic from the syllabus with effective topology and then give presentation on that topic.
i m confused in choosing topology that impress others. please suggest something best.

fly351

yashica wrote: »

thanks to all for their suggestions..
i have to choose one topic from the syllabus with effective topology and then give presentation on that topic.
i m confused in choosing topology that impress others. please suggest something best.

hub and spoke? full mesh? partial mesh?

joe48184

yashica wrote: »

thanks to all for their suggestions..
i have to choose one topic from the syllabus with effective topology and then give presentation on that topic.
i m confused in choosing topology that impress others. please suggest something best.

Depth of knowlege is impressive... pick something you know and are comfortable fielding questions on.

tiersten

yashica wrote: »

thanks to all for their suggestions..
i have to choose one topic from the syllabus with effective topology and then give presentation on that topic.
i m confused in choosing topology that impress others. please suggest something best.

You need to put some time into researching this yourself since the whole point is for you to pass the certification by learning the topics. Asking here and then getting told what to do will mean you won't learn anything. We don't even know what stage you are at in your CCNA.