Uplink interface for EX4200?

Comments

• Options

  IOS2JUNOS Member Posts: 56 ■■□□□□□□□□

  August 2010

  kronicklez wrote: »

  Hi all & experts,
  
  
  
  I want to ask question regarding EX4200. I have 2 EX4200 (24 & 48 port) with 1 uplink module 4 port for each switch. One connection (48 port) is go to CoreSwitch 1 and 2nd (24port) link go to CoreSwitch 2. For EX4200 i create virtual chassis. So my question if put both link at Uplink module at EX4200 what name of interface of uplink that i can see? For example at EX4200 (48 port) i can see xe-0/1/0 and EX4200 (24 port) xe-0/2/0. Is it correct? Some one please guide me because in Juniper web i dont find the detail info regarding this interface. Thanks...

  
  
  ..on your master switch the uplink module will show xe-0/1/0 and on backup switch it'll show xe-1/1/0

  0 · Share on FacebookShare on Twitter
• Options

  kronicklez Member Posts: 40 ■■□□□□□□□□

  August 2010

  Hi IOStoJunos,
  
  
  Thanks for reply. Is it confirm as you said? Thanks and hope your feedback.

  0 · Share on FacebookShare on Twitter
• Options

  IOS2JUNOS Member Posts: 56 ■■□□□□□□□□

  August 2010

  kronicklez wrote: »

  Hi IOStoJunos,
  
  
  Thanks for reply. Is it confirm as you said? Thanks and hope your feedback.

  
  this is how it shows on my switch stack..as for numbering scheme memeber 0 will have ports as 0/0/0- fpc0, pic0,port0 and uplink module will
  be 0/1/0 - fpc0, pic1, port0
  on 2nd switch or memeber 1
  it'll be 1/0/0 fpc1, pic0, port0 and uplink module 1/1/0 fpc1, pic1, port0 and so on

  0 · Share on FacebookShare on Twitter
• Options

  kronicklez Member Posts: 40 ■■□□□□□□□□

  August 2010

  Hi IOStoJunos,
  
  
  
  Thanks for the explanation.

  0 · Share on FacebookShare on Twitter