how much memory does my 2651xm have?

szmarcekszmarcek Member Posts: 33 ■■□□□□□□□□
I am trying to upgrade 2651xm router ios so that it can host ccme 4.1 or later. I have a problem with its memory. it may be another questions which may sound stupid but here it comes, the router currently has 2 128MB Dram which should be 256. Now when the router boots
it shows the following

System Bootstrap, Version 12.2(8r) [cmong 8r], RELEASE SOFTWARE (fc1)
Copyright (c) 2003 by cisco Systems, Inc.
C2600 platform with 262144 Kbytes of main memory

but when I issue show version command I see

Cisco 2651XM (MPC860P) processor (revision 0x400) with 126908K/4164K bytes of memory.
Processor board ID JHY0847K22F (2835333394)
M860 processor: part number 5, mask 2
2 FastEthernet interfaces
4 ISDN Basic Rate interfaces
1 ATM interface
32K bytes of NVRAM.
32768K bytes of processor board System flash (Read/Write)

now when I took out one dram and booted the router it showed



System Bootstrap, Version 12.2(8r) [cmong 8r], RELEASE SOFTWARE (fc1)
Copyright (c) 2003 by cisco Systems, Inc.
C2600 platform with 131072 Kbytes of main memory


So why do I see 126908K/4164K when issuing show version despite the fact that the router has 2x128dram and should show 256?




and another question regarding flash memory. do those 2651xm router have 16mb of built in flash? if yes I have put 32 mb flash memory into the same 2651xm router and when issuing show flash suprisingly I can only see 32 mb of flash

Router#show flash:

System flash directory:
File Length Name/status
1 14955416 c2600-advsecurityk9-mz.123-8.T3.bin
2 305129 crashinfo_20070223-105925 [deleted]
3 317821 crashinfo_20080305-095957 [deleted]
4 8044 dsl_checker_v5_3.tcl
5 16662436 c2600-advsecurityk9-mz.124-23.bin
[32249172 bytes used, 780968 available, 33030140 total]
32768K bytes of processor board System flash (Read/Write)

when I took out that 32mb flash memory and issued show flash command I got 16mb

Router#show flash:

System flash directory:
File Length Name/status
1 14955416 c2600-advsecurityk9-mz.123-8.T3.bin
2 305129 crashinfo_20070223-105925 [deleted]
3 317821 crashinfo_20080305-095957 [deleted]
4 8044 dsl_checker_v5_3.tcl
[15586672 bytes used, 1190540 available, 16777212 total]
16384K bytes of processor board System flash (Read/Write)

when I put the 32mb flash card and issued show flash, it again displayed 32mb ram as shown below

System flash directory:
File Length Name/status
1 14955416 c2600-advsecurityk9-mz.123-8.T3.bin
2 305129 crashinfo_20070223-105925 [deleted]
3 317821 crashinfo_20080305-095957 [deleted]
4 8044 dsl_checker_v5_3.tcl
5 16662436 c2600-advsecurityk9-mz.124-23.bin
[32249172 bytes used, 780968 available, 33030140 total]
32768K bytes of processor board System flash (Read/Write)

so it looks like it should show 48 mb of flash instead of 32 but it doesn't.

Am i missing something very obvious?icon_rolleyes.gif

Comments

  • tierstentiersten Member Posts: 4,505
    szmarcek wrote: »
    Cisco 2651XM (MPC860P) processor (revision 0x400) with 126908K/4164K bytes of memory.
    You need a late version of 12.3T or newer for support for greater than 128MB in a 2600XM. Get 12.4 or 12.4T.
    szmarcek wrote: »
    32768K bytes of processor board System flash (Read/Write)
    You need to make sure it isn't partitioned and format the flash when you add or change the flash SIMM.
  • szmarcekszmarcek Member Posts: 33 ■■□□□□□□□□
    I changed the IOS to 12.4 and it recognized the 256 memory. Also formated the flash and all went well. Thanks a lot!!!
  • NetwurkNetwurk Member Posts: 1,155 ■■■■■□□□□□
    256MB memory on a router, wow we've come a long way since the 2500 days.

    And the latest and greatest top out even higher from what I've heard.

    I have to remember to do a quick sh ver at work next time I am on one of the new ones, assuming they trust me with those

    ;)
  • woischwoisch Member Posts: 40 ■■□□□□□□□□
    hmmm how can i get more flash memory? I need it to extract the cme-full-4.1.0.2 file.

    HEre is a sh version and a sh flash:

    Cisco 2610XM (MPC860P) processor (revision 1.0) with 127627K/3445K bytes of memory.
    Processor board ID JAD06400GWM
    M860 processor: part number 5, mask 2
    1 FastEthernet interface
    1 Serial interface
    2 Serial(sync/async) interfaces
    32K bytes of NVRAM.
    49152K bytes of processor board System flash (Read/Write)

    System flash directory:
    File Length Name/status
    1 34465540 c2600-adventerprisek9-mz.124-15.T7.bin
    [34465604 bytes used, 15341752 available, 49807356 total]
    49152K bytes of processor board System flash (Read/Write)

    only 15 MB left but i need more...
  • tierstentiersten Member Posts: 4,505
    woisch wrote: »
    hmmm how can i get more flash memory? I need it to extract the cme-full-4.1.0.2 file.
    Use a smaller feature set and/or trim the CME image by deleting firmware for phones you don't actually have.
Sign In or Register to comment.