CVoice lab setup

auosauos Member Posts: 186
Hi,
I found in CCVP by (Kevin Wallace) the (CCVP Lab Equipment Recommendation) document and it very useful, but my question is should I need all this stuff to setup my CVoice lab, it is very expensive.

Hardware need for CVoice lab by (Kevin Wallace)
-Cisco WS-C3750-24TS 24-Port Cisco Catalyst 3750 Switch #1
-PVDM2-8 Packet Voice DSP Module version 2 - 8 #3
-PVDM2-16 Packet Voice DSP Module version 2 - 16 #3
-VWIC-1MFT-T1 1-Port T1 Voice WAN Interface Card #2
-C2811 512/256 Cisco 2811 ISR Router with 512 MB of DRAM and 256 MB of Flash #3
-HWIC-4ESW 4-Port Ethernet Switch Module #1
-WIC-1T 2-Port DB-60 Serial Interface Card #2
-AIM2-CUE Cisco Unity Express AIM Module Version 2 #1
-VWIC-2MFT-T1 2-Port T1 Voice WAN Interface Card #1
-Serial 2T 2-Port Smart Serial WAN Interface Card #1

Comments

  • hypnotoadhypnotoad Banned Posts: 915
    Since you've already done QoS, I wouldnt bother with the 3750. For CVoice you really dont need any specific switch, but PoE is nice.

    The AIM2-CUE is a faster version of the AIM-CUE, but for a lab it doesnt matter. Come to think of it, is a CUE needed at all for the CCVP?

    You can get by with non ISR routers for most (all?) things CCVP. Especially the 2811....2801 is fine.

    The PVDM2's can be adjusted accordingly as well. Although that config is ideal, it won't be a deal breaker if you cant support quite that many voice channels.
Sign In or Register to comment.